HD not detected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Cabel select requires special cables
and you just can't set everything to cable select and expect everything to work all the time.
Many a dodgey techniton has done this and learnt the error of their ways.
Cable select uses a signal on the cable and it depends which port the drive is pougged into as to whether it is
master or slave.

Regards, Kerry.
On Sat, Jan 19, 2002 at 02:33:47PM +1100, Shaun Oliver wrote:
> ok chuck first and foremost you must once you've put a new drive in the
> machine, always check the bios to ensure that all drives are being
> detected.
> a good way to ensure that your drives are always seen is to set them all
> to auto detect and possibly move the jumper to cable sellect.
> the bios if it's recent enough should just pick up the fact that there's
> a drive there and assign it according to it's ide channel.
> hth
> On Fri, 18
> Jan 2002, Charles Hallenbeck wrote:
> 
> > I hope someone may have an explanation or a suggestion for this
> > one:
> >
> > My friend has a Gateway machine with Windows 98 on a 12 GB disk
> > which works fine. She wants to move on up to Linux, and purchased
> > a second HD, a Maxtor 40 GB disk. She knows even less about
> > hardware than I do, and together we proceeded to just put the
> > disk in the machine and cable it up, without even looking at its
> > jumpers.
> >
> > The machine now still boots fine into Windows, and Windows can
> > see the second drive okay. However, Linux cannot see either the
> > old drive or the new one. She is going to install Slackware 8.0
> > on her second disk, but when the installation boot disk and root
> > disk are run, and we have the login invitation as root, neither
> > fdisk nor cfdisk can 'open' any of the four HD devices, not even
> > /dev/hda.
> >
> > Reviewing the boot messages for the ramdisk installation system,
> > there is no mention of any HD either. It does find her CD drive
> > on /dev/hdc, but no other /dev/hdx devices are found.
> >
> > Anybody have any idea where to look for this problem?
> >
> > Thanks - Chuck
> >
> > *<<<=-=>>>*<<<=-=>>>*<<<=-=>>>*<<<=-=>>>*
> > Visit me at http://www.mhonline.net/~chuckh
> > The Moon is Waxing Crescent (24% of Full)
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> 
> -- 
> Shaun Oliver
> 
> Marriage is a three ring circus:
> engagement ring, wedding ring, and suffering.
>                 -- Roger Price
> 
> Email: shauno at goanna.net.au
> Icq: 76958435
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 

-- 
Kerry Hoath:  kerry at gotss.net kerry at gotss.eu.org or  kerry at gotss.spice.net.au




[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux