well for starters, if you have a boot disk for your original kernel, I suggest you run it and boot your linux that way. then carefully look over your /etc/lilo.conf and make the appropriate changes. then once you're done, type lilo to reread the configuration file and then reboot. if all goes well, you'll have yourself a nice shiny new linux kernel to play with. Shaun.. On Mon, 24 Sep 2001, Tim Burgess wrote: > Hi all, > > I got a good kernel compile out of 2.4.6 and SpeakUp 0.10a.tar.gz then blew > it all by getting my lilo.conf entry wrong, I think. I'm now stuck until I > can borrow some eyeballs to see if I can retrieve the situation. > > In the meantime, thanks to all of you who have gritted your teeth at my > incompetence so far. > > Tim > > > -----Original Message----- > From: speakup-admin at braille.uwo.ca > [mailto:speakup-admin at braille.uwo.ca]On Behalf Of William F. Acker > WB2FLW +1-303-777-8123 > Sent: 23 September 2001 21:18 > To: speakup at braille.uwo.ca > Subject: RE: kernel compile gone wrong. > > > Hi, Tim, > > I have a patch for 2.4 kernels made from the 20010917 CVS snapshot of > Speakup. I can make a 2.2 version if you need it. Just say the word and > I'll send it off. > > > > > HTH. > Bill in Denver > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup >
