a shorter version of this is to use the smbmount command like this: smbmount //host/sharename /mountpoint This only works with recent kernels with smbfs and recent version of samba. -----Original Message----- From: Geoff Shang [mailto:gshang@xxxxxxxxx] Sent: Wednesday, May 23, 2001 1:23 PM To: speakup at braille.uwo.ca Subject: Re: samba problem. Hi: I realise you're going about doing a much more complicated samba setup than I use, but it might be worth telling what I did. I only really want to read windows shares from linux, as I have no real need to go the other way. I just set the shares up in windows, then used the mount command as per normal to mount it. Mount calls smbmount in order to achieve this. The syntax for mounting smb shares is: mount -t smbfs //host/sharename /mountpoint The mount procedure will prompt you for the password. So for example, I mount my primary windows drive as follows: mount -t smbfs //picard/c /windows/c Where picard is the name of the windows box, c is the sharename on the windows box, and /windows/c is the mount point (this last one could just as easily be /mnt or whatever). Geoff. _______________________________________________ Speakup mailing list Speakup at braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup
