>
> Got a weird one. I have a pc which I'm trying to install Linux on. The
> deal is that it has an atapi ide cdrom but scsi only hard drives. If I
> use the bare.i only the cdrom is seen where as if I use the bbare.s only
> the hard drives are seen. I have compiled a kernel for another box that
> is similar which has support for both the ide cdrom and the scsi host
> controler. My question is whether there is a way that I'm obviously
> overlooking to install slackware on this box or can I use something like
> rawrite and write the compiled kernel I have onto a floppy? If I do that
> do I justtake the kernel file itsefl and just rawrite it to the floppy or
> do I have do do something specific?
A very easy way around this problem is to install over the network. Just
put the cd in to an up and running machine. Do a quick nfs setup and
mount the drive on the machine that your going to be installing on. I
prefer to do it that way all the time for some strange reason.
Frank
--
Frank Carmickle
phone: 412 761-9568
email: frankiec at dryrose.com
