Linux version 2.4.1-0.1.9 (root at porky.devel.redhat.com) (gcc version
2.96 20000731 (Red Hat Linux 7.1 2.96-75)) #1 Wed Feb 14 21:10:32 EST
2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009e000 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000800 @ 000000000009f800 (reserved)
BIOS-e820: 0000000000020000 @ 00000000000e0000 (reserved)
BIOS-e820: 0000000003f00000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301
BOOT_FILE=/boot/vmlinuz-2.4.1-0.1.9 speakup_ser=0
Initializing CPU#0
Detected 166.347 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 331.77 BogoMIPS
Memory: 62128k/65536k available (1018k kernel code, 3016k reserved,
388k data, 236k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 008001bf 00000000 00000000, vendor = 0
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After vendor init, caps: 008001bf 00000000 00000000 00000000
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: PCI BIOS revision 2.10 entry at 0xfd9cf, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 41208kB/13736kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc90-0xfc97, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc98-0xfc9f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC AC31600H, ATA DISK drive
hdb: WDC AC21200H, ATA DISK drive
hdc: BCD-48SB CD-ROM, ATAPI CD/DVD-ROM drive
hdd: IBM-DTLA-307045, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Disabling (U)DMA for WDC AC31600H
hda: 3173184 sectors (1625 MB) w/128KiB Cache, CHS=787/64/63
hdb: 2503872 sectors (1282 MB) w/128KiB Cache, CHS=621/64/63, DMA
hdd: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63,
UDMA(33)
Partition check:
hda: [EZD] [remap 0->1] [787/64/63] hda1
hdb: hdb1 hdb2 < hdb5 >
hdd: [EZD] [remap 0->1] [5606/255/63] hdd1 hdd2 hdd3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
atp.c:v1.09 8/9/2000 Donald Becker <becker at scyld.com>
http://www.scyld.com/network/atp.html
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
LVM version 0.9.1_beta2 by Heinz Mauelshagen (18/01/2001)
lvm -- Driver successfully initialized
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 236k freed
Adding Swap: 133016k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 21:21:19 Feb 14 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
FAT bread failed
ip_conntrack (512 buckets, 4096 max)
3c59x.c:LK1.1.12 06 Jan 2000 Donald Becker and others.
http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $
See Documentation/networking/vortex.txt
eth0: 3Com PCI 3c905C Tornado at 0xfc00, 00:01:03:69:8d:ce, IRQ 11
product code 'FZ' rev 00.13 date 07-17-00
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate
interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
eth0: using NWAY autonegotiation
eth0: using NWAY autonegotiation
eth0: using NWAY autonegotiation
FAT bread failed
>>> gshang at uq.net.au 03/29/01 10:04AM >>>
Hi:
This is no good to us. this is the system log. What we need to see is
the
log of your boot-up messages. You can get this by using the dmesg
command.
Do:
dmesg >filename
where filename is some arbitrary filename that you want to dump the
output
into.
Geoff.
_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
