Hi, Jim! Of course, I am plugged into TTYS0. How would I expect it to talk otherwise? Regards, Vic ----- Original Message ----- From: "Jim Wantz" <jwantz@xxxxxxxxxxxxxxxxxxx> To: <speakup at braille.uwo.ca> Sent: Thursday, May 11, 2000 12:53 PM Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work with DoubleTalk LT | Hi Vic, | Sometimes you won't get speech when you aren't plugged into ttyS0. Make | sure your Doubletalk LT is plugged into that port and it should work. I | have experienced another problem, speech will hang if you leave it on | during the entire initialization process. However, Kirk's latest | Doubletalk LT driver has cured this. I would recommend shutting off | speech when it begins to talk and not reanble it until you get to the | login prompt. Then rebuild the kernel with the latest drivers that are in | the /pub/linux/speakup directory on good ol' bumpy under the name: | newdrv.tar.gz. | Jim Wantz WB0TFK | | | On Thu, 11 May 2000, Victor Tsaran wrote: | | > I downloaded the boot disk for RedHat6.1, ltlkb.bin, and copied it onto a | > floppy. I tried it on two machines and in both cases the machines booted, but | > no speech ever came up. Anyone have an idea why this behavior? | > Vic | > | > | > _______________________________________________ | > Speakup mailing list | > Speakup at braille.uwo.ca | > http://speech.braille.uwo.ca/mailman/listinfo/speakup | > | | | _______________________________________________ | Speakup mailing list | Speakup at braille.uwo.ca | http://speech.braille.uwo.ca/mailman/listinfo/speakup
