I don't know exactly what you mean by that, but I did take the >/dev/null out and got these messages, some of them seem like errors and some seem like Xvfb isn't working the way it should. RAP v2.0 -- use interrupt to abort _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners: server already running Fatal server error: Cannot establish any listening sockets - Make sure an X server isn't already running _X11TransSocketINETConnect: Can't connect: errno = 111 _X11TransSocketINETConnect: Can't connect: errno = 111 _X11TransSocketINETConnect: Can't connect: errno = 111 _X11TransSocketINETConnect: Can't connect: errno = 111 _X11TransSocketINETConnect: Can't connect: errno = 111 _X11TransSocketINETConnect: Can't connect: errno = 111 Failed to open your X display. Please try setting your DISPLAY environment variable and try again. Well, I don't know why it thinks there's another server is running, I double-checked that. Any ideas? Maybe I'll update my Xvfb and see what that does. On 2 Apr 2000, Kirk Reiser wrote: > Hi Jacob: If you are using the old rap script then you will need to > change the device it wathces for from 7 to 9. > > If that isn't the problem then you'll need to take out the >/dev/null > 2>&1 to see what messages are being produced. > > Kirk > > -- > > Kirk Reiser The Computer Braille Facility > e-mail: kirk at braille.uwo.ca University of Western Ontario > phone: (519) 661-3061 > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup >
