Re: [PATCH v2 4/4] clk: qcom: lpass: Add support for LPASS clock controller for SC7180

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2020-06-10 10:11:49)
> On 5/27/2020 8:40 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2020-05-17 02:22:24)
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       lpass_core_cc_sc7180_regmap_config.name = "lpass_core_cc";
> >> +       regmap = qcom_cc_map(pdev, &lpass_core_cc_sc7180_desc);
> >> +       if (IS_ERR(regmap))
> >> +               return PTR_ERR(regmap);
> >> +
> >> +       /*
> >> +        * Keep the CLK always-ON
> > 
> > Why? Presumably to make sure we can access the lpass sysnoc path all the
> > time?
> > 
> 
> This is an always ON clock from HW, just making sure to keep it enabled.

I'm not following. Hardware says it must always be enabled? If it isn't
enabled is it even possible to write this register?

> 
> >> +        * LPASS_AUDIO_CORE_SYSNOC_SWAY_CORE_CLK
> >> +        */
> >> +       regmap_update_bits(regmap, 0x24000, BIT(0), BIT(0));
> >> +




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux