Re: [PATCH v1 2/2] clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 11, 2020 at 05:43:56PM +0530, Taniya Das wrote:
> The disp_cc_mdss_rscc_ahb_clk is default enabled from hardware and thus
> does not require to be marked CRITICAL. This which would allow the RCG to
> be turned OFF when the display turns OFF and not blocking XO.
> 
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
>  drivers/clk/qcom/dispcc-sc7180.c | 19 -------------------
>  1 file changed, 19 deletions(-)
> 
> diff --git a/drivers/clk/qcom/dispcc-sc7180.c b/drivers/clk/qcom/dispcc-sc7180.c
> index dd7af41..0a5d395 100644
> --- a/drivers/clk/qcom/dispcc-sc7180.c
> +++ b/drivers/clk/qcom/dispcc-sc7180.c
> @@ -592,24 +592,6 @@ static struct clk_branch disp_cc_mdss_rot_clk = {
>  	},
>  };
> 
> -static struct clk_branch disp_cc_mdss_rscc_ahb_clk = {
> -	.halt_reg = 0x400c,
> -	.halt_check = BRANCH_HALT,
> -	.clkr = {
> -		.enable_reg = 0x400c,
> -		.enable_mask = BIT(0),
> -		.hw.init = &(struct clk_init_data){
> -			.name = "disp_cc_mdss_rscc_ahb_clk",
> -			.parent_data = &(const struct clk_parent_data){
> -				.hw = &disp_cc_mdss_ahb_clk_src.clkr.hw,
> -			},
> -			.num_parents = 1,
> -			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
> -			.ops = &clk_branch2_ops,
> -		},
> -	},
> -};
> -
>  static struct clk_branch disp_cc_mdss_rscc_vsync_clk = {
>  	.halt_reg = 0x4008,
>  	.halt_check = BRANCH_HALT,
> @@ -687,7 +669,6 @@ static struct clk_regmap *disp_cc_sc7180_clocks[] = {
>  	[DISP_CC_MDSS_PCLK0_CLK_SRC] = &disp_cc_mdss_pclk0_clk_src.clkr,
>  	[DISP_CC_MDSS_ROT_CLK] = &disp_cc_mdss_rot_clk.clkr,
>  	[DISP_CC_MDSS_ROT_CLK_SRC] = &disp_cc_mdss_rot_clk_src.clkr,
> -	[DISP_CC_MDSS_RSCC_AHB_CLK] = &disp_cc_mdss_rscc_ahb_clk.clkr,
>  	[DISP_CC_MDSS_RSCC_VSYNC_CLK] = &disp_cc_mdss_rscc_vsync_clk.clkr,
>  	[DISP_CC_MDSS_VSYNC_CLK] = &disp_cc_mdss_vsync_clk.clkr,
>  	[DISP_CC_MDSS_VSYNC_CLK_SRC] = &disp_cc_mdss_vsync_clk_src.clkr,

We found that this change leads to a panic at boot time on SC7180 devices
without display configuration (e.g. the SC7180 IDP with the current DT):

[    2.412820] SError Interrupt on CPU6, code 0xbe000411 -- SError
[    2.412822] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G S                5.4.22 #103
[    2.412822] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[    2.412823] pstate: 20c00089 (nzCv daIf +PAN +UAO)
[    2.412823] pc : regmap_mmio_read32le+0x28/0x40
[    2.412823] lr : regmap_mmio_read+0x44/0x6c
[    2.412824] sp : ffffffc01005ba90
[    2.412824] x29: ffffffc01005ba90 x28: 0000000000000000
[    2.412825] x27: 0000000000000000 x26: 0000000000000000
[    2.412826] x25: 0000000000000000 x24: ffffffd1f4aed018
[    2.412827] x23: ffffffd1f4c12148 x22: ffffff8177a6c800
[    2.412827] x21: 0000000000002048 x20: ffffff8177489e00
[    2.412828] x19: 0000000000002048 x18: 000000004a746f4b
[    2.412829] x17: 00000000d0e09034 x16: 000000005079b450
[    2.412830] x15: 000000003e3bf7ed x14: 0000000000007fff
[    2.412830] x13: ffffff8177309b40 x12: 0000000000000000
[    2.412831] x11: 0000000000000000 x10: 0000000000000000
[    2.412831] x9 : 0000000000000001 x8 : ffffffc011c02048
[    2.412832] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000
[    2.412833] x5 : 0000000000000000 x4 : 0000000000000000
[    2.412834] x3 : 0000000000000000 x2 : ffffffc01005bb84
[    2.412834] x1 : 0000000000002048 x0 : 0000000080000000
[    2.412835] Kernel panic - not syncing: Asynchronous SError Interrupt
[    2.412836] CPU: 6 PID: 1 Comm: swapper/0 Tainted: G S                5.4.22 #103
[    2.412836] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
[    2.412836] Call trace:
[    2.412837]  dump_backtrace+0x0/0x150
[    2.412837]  show_stack+0x20/0x2c
[    2.412837]  dump_stack+0xa0/0xd8
[    2.412838]  panic+0x158/0x360
[    2.412838]  panic+0x0/0x360
[    2.412838]  arm64_serror_panic+0x78/0x84
[    2.412839]  do_serror+0x110/0x118
[    2.412839]  el1_error+0x84/0xf8
[    2.412839]  regmap_mmio_read32le+0x28/0x40
[    2.412840]  regmap_mmio_read+0x44/0x6c
[    2.412840]  _regmap_bus_reg_read+0x34/0x44
[    2.412841]  _regmap_read+0x88/0x164
[    2.412841]  regmap_read+0x54/0x78
[    2.412841]  clk_is_enabled_regmap+0x3c/0x8c
[    2.412842]  clk_core_is_enabled+0x68/0xac
[    2.412842]  clk_disable_unused_subtree+0x90/0x22c
[    2.412843]  clk_disable_unused_subtree+0x34/0x22c
[    2.412843]  clk_disable_unused+0x74/0x108
[    2.412843]  do_one_initcall+0x13c/0x2c8
[    2.412844]  do_initcall_level+0x144/0x16c
[    2.412844]  do_basic_setup+0x30/0x48
[    2.412844]  kernel_init_freeable+0xc4/0x140
[    2.412845]  kernel_init+0x14/0x100
[    2.412845]  ret_from_fork+0x10/0x18
[    2.412858] SMP: stopping secondary CPUs
[    2.412859] Kernel Offset: 0x11e3a00000 from 0xffffffc010000000
[    2.412859] PHYS_OFFSET: 0xffffffe780000000
[    2.412860] CPU features: 0x0006,2a80aa18
[    2.412860] Memory Limit: none



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux