On 2019-12-04 7:28 am, Andreas Färber wrote:
Hi YanQing,
+ LAKML + Mark + Will
Am 04.12.19 um 05:55 schrieb Wang YanQing:
I use "perf record" to debug performance issue on RTD1296 SOC, it does't work, but
the "perf stat" is ok!
Thanks for the report - which board, branch and (base) tag are you
testing against? And are you building perf yourself from kernel sources,
or are you using some distro package?
I only have Busybox in my initrd on DS418; I have not tested perf.
After some dig in the kernel, I find the reason is no pmu overflow interrupt, I think
below pmu configuration isn't right for RTD1296:
"
arm_pmu: arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
};
"
We need 4 PMU SPI for RTD1296 (4 cores), and I guess the 48 isn't right too.
Note that above rtd129x.dtsi snippet is not complete. See rtd1296.dtsi:
&arm_pmu {
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
That doesn't help much, since 4 affinities for one SPI is rather
nonsensical.
48 and high/4 match what I see in the latest BSP:
https://github.com/BPI-SINOVOIP/BPI-M4-bsp/blob/master/linux-rtk/arch/arm64/boot/dts/realtek/rtd129x/rtd-1296.dtsi#L116
Any suggestion is welcome.
Thanks!
The only difference I see is "arm,cortex-a53-pmu" vs. "arm,armv8-pmuv3".
By my reading of arch/arm64/kernel/perf_event.c the only difference
between the two should be the name and an extra cache_map. You could try
the other compatible string in your .dts, but I doubt it'll help.
Hopefully the Realtek or Arm guys can shed some light.
If the SoC really has all 4 overflow interrupts combined into a single
SPI line, then sampling just isn't going to be supported - it's
unreasonably difficult to handle overflow when the IRQ may be taken on
the wrong CPU.
Robin.
