Avoid locking in the interrupt context to improve latency. Since we don't lock in the interrupt context, it is possible that we now could race with the DRV_CONTROL register that writes the enable register and cleared by the interrupt handler. For fire-n-forget requests, the interrupt may be raised as soon as the TCS is triggered and the IRQ handler may clear the enable bit before the DRV_CONTROL is read back. Use the non-sync variant when enabling the TCS register to avoid reading back a value that may been cleared because the interrupt handler ran immediately after triggering the TCS. Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx> --- drivers/soc/qcom/rpmh-rsc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index 5ede8d6de3ad..694ba881624e 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -242,9 +242,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p) write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0); write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0); write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i)); - spin_lock(&drv->lock); clear_bit(i, drv->tcs_in_use); - spin_unlock(&drv->lock); if (req) rpmh_tx_done(req, err); } @@ -304,7 +302,7 @@ static void __tcs_trigger(struct rsc_drv *drv, int tcs_id) enable = TCS_AMC_MODE_ENABLE; write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable); enable |= TCS_AMC_MODE_TRIGGER; - write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable); + write_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, enable); } static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs, -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
