From: Jonathan Marek <jonathan@xxxxxxxx> This patch adds support for the bq24192 variant to bq24190_charger. Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx> [masneyb@xxxxxxxxxxxxx: Changed if statement to a switch based on feedback from Sebastian Reichel.] Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> --- drivers/power/supply/bq24190_charger.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index b58df04d03b3..44d3aff32885 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -1637,8 +1637,12 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi) if (ret < 0) return ret; - if (v != BQ24190_REG_VPRS_PN_24190 && - v != BQ24190_REG_VPRS_PN_24192I) { + switch (v) { + case BQ24190_REG_VPRS_PN_24190: + case BQ24190_REG_VPRS_PN_24192: + case BQ24190_REG_VPRS_PN_24192I: + break; + default: dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v); return -ENODEV; } @@ -1931,6 +1935,7 @@ static const struct dev_pm_ops bq24190_pm_ops = { static const struct i2c_device_id bq24190_i2c_ids[] = { { "bq24190" }, + { "bq24192" }, { "bq24192i" }, { }, }; @@ -1939,6 +1944,7 @@ MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids); #ifdef CONFIG_OF static const struct of_device_id bq24190_of_match[] = { { .compatible = "ti,bq24190", }, + { .compatible = "ti,bq24192", }, { .compatible = "ti,bq24192i", }, { }, }; -- 2.17.2