[PATCH v2 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
one of the 96Boards CE platform.
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 46feedf7c989..35f95154316b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -300,28 +300,28 @@
 			compatible = "gpio-leds";
 
 			led@1 {
-				label = "apq8016-sbc:green:user1";
+				label = "green:user1";
 				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 				default-state = "off";
 			};
 
 			led@2 {
-				label = "apq8016-sbc:green:user2";
+				label = "green:user2";
 				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
 
 			led@3 {
-				label = "apq8016-sbc:green:user3";
+				label = "green:user3";
 				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc1";
 				default-state = "off";
 			};
 
 			led@4 {
-				label = "apq8016-sbc:green:user4";
+				label = "green:user4";
 				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "none";
 				panic-indicator;
@@ -329,14 +329,14 @@
 			};
 
 			led@5 {
-				label = "apq8016-sbc:yellow:wlan";
+				label = "yellow:wlan";
 				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "phy0tx";
 				default-state = "off";
 			};
 
 			led@6 {
-				label = "apq8016-sbc:blue:bt";
+				label = "blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
-- 
2.17.1




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux