On 10/9/2018 6:35 PM, Govind Singh wrote:
Add support for the WCSS QDSP gcc clock control used on qcs404 based devices.
This would allow wcss remoteproc driver to control the required gcc clocks to
bring the subsystem out of reset.
Signed-off-by: Govind Singh <govinds@xxxxxxxxxxxxxx>
---
drivers/clk/qcom/gcc-qcs404.c | 39 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
index 6d1387e..bcbfe19 100644
--- a/drivers/clk/qcom/gcc-qcs404.c
+++ b/drivers/clk/qcom/gcc-qcs404.c
@@ -2505,6 +2505,34 @@ enum {
},
};
+static struct clk_branch gcc_ahbs_cbcr_clk = {
There is no such clock, the clock names should match exactly as they are
represented in hardware plans.
+ .halt_reg = 0x1e004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1e004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ahb_cbcr_clk",
+ .ops = &clk_branch2_ops,
+ .flags = CLK_IGNORE_UNUSED,
Do we need this flag?
+ },
+ },
+};
+
+static struct clk_branch gcc_axim_cbcr_clk = {
+ .halt_reg = 0x1e008,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1e008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_axim_cbcr_clk",
+ .ops = &clk_branch2_ops,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ },
+};
+
static struct clk_regmap *gcc_qcs404_clocks[] = {
[APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
[BLSP1_QUP0_I2C_APPS_CLK_SRC] = &blsp1_qup0_i2c_apps_clk_src.clkr,
@@ -2642,6 +2670,9 @@ enum {
[GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
[GCC_DCC_CLK] = &gcc_dcc_clk.clkr,
[GCC_DCC_XO_CLK] = &gcc_dcc_xo_clk.clkr,
+ [GCC_WCSS_Q6_AHB_CBCR_CLK] = NULL,
+ [GCC_WCSS_Q6_AXIM_CBCR_CLK] = NULL,
+
};
static const struct qcom_reset_map gcc_qcs404_resets[] = {
@@ -2659,6 +2690,7 @@ enum {
[GCC_PCIE_0_LINK_DOWN_BCR] = {0x3E038},
[GCC_PCIEPHY_0_PHY_BCR] = {0x3E03C},
[GCC_EMAC_BCR] = {0x4E000},
+ [GCC_WDSP_RESTART] = {0x19000},
s/RESTART/BCR
};
static const struct regmap_config gcc_qcs404_regmap_config = {
@@ -2669,7 +2701,7 @@ enum {
.fast_io = true,
};
-static const struct qcom_cc_desc gcc_qcs404_desc = {
+static struct qcom_cc_desc gcc_qcs404_desc = {
.config = &gcc_qcs404_regmap_config,
.clks = gcc_qcs404_clocks,
.num_clks = ARRAY_SIZE(gcc_qcs404_clocks),
@@ -2702,6 +2734,11 @@ static int gcc_qcs404_probe(struct platform_device *pdev)
clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk);
clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk);
+ if (of_property_read_bool(pdev->dev.of_node, "qcom,wcss-protected")) {
+ gcc_qcs404_clocks[GCC_WCSS_Q6_AHB_CBCR_CLK] = &gcc_ahbs_cbcr_clk.clkr;
+ gcc_qcs404_clocks[GCC_WCSS_Q6_AXIM_CBCR_CLK] = &gcc_axim_cbcr_clk.clkr;
+ }
+
return qcom_cc_really_probe(pdev, &gcc_qcs404_desc, regmap);
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
