Hi Amit, On 4/18/2018 6:33 PM, Amit Nischal wrote: >>> + /* Disable the GPLL0 active input to MMSS and GPU via MISC registers */ >>> + regmap_update_bits(regmap, 0x09ffc, 0x3, 0x3); >>> + regmap_update_bits(regmap, 0x71028, 0x3, 0x3); >> >> I think we'll have to throw in the pipe clk branch stuff in here too? >> And then drop the pipe clks from the driver? > > All the USB pipe clocks would be taken care. The PCIE pipe branch > clocks would have to be explicitly disabled so as to retain the > memory logic. Otherwise, it would lead to memory corruption in case > the external source is directly disabled without disabling the branch clock. PHY driver is same for both USB and PCIE and both PHYs use pipe_clk. If there is indeed some limitation and pipe_clk cant be left enabled always then I will suggest to not change pipe_clk handling for USB as well. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
