For upcoming targets like sdm845, POR value of the hardware clock control bit is set for most of root clocks which needs to be cleared for software to be able to control. For older targets like MSM8996, this bit is reserved bit and having POR value as 0 so this patch will work for the older targets too. So update the configuration mask to take care of the same to clear hardware clock control bit. Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx> --- drivers/clk/qcom/clk-rcg2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index bbeaf9c..984de9c 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -42,6 +42,7 @@ #define CFG_MODE_SHIFT 12 #define CFG_MODE_MASK (0x3 << CFG_MODE_SHIFT) #define CFG_MODE_DUAL_EDGE (0x2 << CFG_MODE_SHIFT) +#define CFG_HW_CLK_CTRL_MASK BIT(20) #define M_REG 0x8 #define N_REG 0xc @@ -276,7 +277,7 @@ static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) } mask = BIT(rcg->hid_width) - 1; - mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK; + mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK; cfg = f->pre_div << CFG_SRC_DIV_SHIFT; cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; if (rcg->mnd_width && f->n && (f->m != f->n)) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
