Add support for SAW controlled regulators in 8x96.
Document it.
Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx>
---
.../bindings/regulator/qcom,spmi-regulator.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 57d2c65..406f2e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -110,6 +110,11 @@ Qualcomm SPMI Regulators
Definition: Reference to regulator supplying the input pin, as
described in the data sheet.
+- qcom,saw-reg:
+ Usage: optional
+ Value type: <phandle>
+ Description: Reference to syscon node defining the SAW registers.
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
@@ -201,6 +206,17 @@ see regulator.txt - with additional custom properties described below:
2 = 0.55 uA
3 = 0.75 uA
+- qcom,saw-slave:
+ Usage: optional
+ Value type: <boo>
+ Description: SAW controlled gang slave. Will not be configured.
+
+- qcom,saw-leader:
+ Usage: optional
+ Value type: <boo>
+ Description: SAW controlled gang leader. Will be configured as
+ SAW regulator.
+
Example:
regulators {
@@ -221,3 +237,32 @@ Example:
....
};
+
+Example 2:
+
+ saw3: syscon@9A10000 {
+ compatible = "syscon";
+ reg = <0x9A10000 0x1000>;
+ };
+
+ ...
+
+ spm-regulators {
+ compatible = "qcom,pm8994-regulators";
+ qcom,saw-reg = <&saw3>;
+ s8 {
+ qcom,saw-slave;
+ };
+ s9 {
+ qcom,saw-slave;
+ };
+ s10 {
+ qcom,saw-slave;
+ };
+ pm8994_s11_saw: s11 {
+ qcom,saw-leader;
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1140000>;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
