On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:
> Reviewed-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
> 1 file changed, 103 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index 6a838b5..dbca7ec 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -21,6 +21,7 @@
>
> aliases {
> serial0 = &blsp1_uart5;
> + serial1 = &serial_blsp2;
> };
>
> chosen {
> @@ -41,6 +42,47 @@
> bias-disable;
> };
> };
> +
> + i2c_0_pins: i2c_0_pinmux {
> + mux {
> + pins = "gpio42", "gpio43";
> + function = "blsp1_i2c";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + spi_0_pins: spi_0_pins {
> + mux {
> + pins = "gpio38", "gpio39", "gpio40", "gpio41";
> + function = "blsp0_spi";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + hsuart_pins: hsuart_pins {
> + mux {
> + pins = "gpio46", "gpio47", "gpio48", "gpio49";
> + function = "blsp2_uart";
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> + qpic_pins: qpic_pins {
> + mux {
> + pins = "gpio1", "gpio3", "gpio4",
> + "gpio5", "gpio6", "gpio7",
> + "gpio8", "gpio10", "gpio11",
> + "gpio12", "gpio13", "gpio14",
> + "gpio15", "gpio16", "gpio17";
> + function = "qpic";
I would prefer that you move the pinmux part to the same dtsi that
defines the nand and add the board specific pinconf (electrical
properties) here. That way we limit the repetition between the board
files.
> + drive-strength = <8>;
> + bias-disable;
> + };
> + };
> +
> };
>
Other than that,
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
