On Mon, Feb 19, 2018 at 04:26:18PM +0530, Abhishek Sahu wrote: > On 2018-02-16 10:18, Sricharan R wrote: > >On 2/3/2018 1:28 PM, Abhishek Sahu wrote: > >>Currently the completion timeout is being taken according to > >>maximum transfer length which is too high if SCL is operating in > >>high frequency. This patch calculates timeout on the basis of > >>one-byte transfer time and uses the same for completion timeout. > >> > >>Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx> > >>--- > >> drivers/i2c/busses/i2c-qup.c | 9 ++++++--- > >> 1 file changed, 6 insertions(+), 3 deletions(-) > >> > >>diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c > >>index a91fc70..6df65ea 100644 > >>--- a/drivers/i2c/busses/i2c-qup.c > >>+++ b/drivers/i2c/busses/i2c-qup.c > >>@@ -130,8 +130,8 @@ > >> #define MX_TX_RX_LEN SZ_64K > >> #define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT) > >> > >>-/* Max timeout in ms for 32k bytes */ > >>-#define TOUT_MAX 300 > >>+/* Min timeout for i2c transfers */ > >>+#define TOUT_MIN 2 > >> > > > > may be you can mention, why is this 2 ? > > > > This 2 seconds is timeout which I am adding on the top of maximum > xfer time calculated from bus speed to compensate the interrupt > latency and other factors. It will make xfer timeout minimum as > 2 seconds. > > I will update the comment to explain it in more detail. Once you do that add: Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
