Thanks for your review Rohit,
On 21/02/18 11:14, Rohit Kumar wrote:
On 2/13/2018 10:28 PM, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
This patch adds support to q6asm dai driver which configures Q6ASM
streams
to pass pcm data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
[..]
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c
b/sound/soc/qcom/qdsp6/q6asm-dai.c
new file mode 100644
index 000000000000..7c5e94b2ced4
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2016, The Linux Foundation
+ * Copyright (c) 2017, Linaro Limited
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <asm/dma.h>
[..]
+static struct snd_pcm_hw_constraint_list constraints_sample_rates = {
+ .count = ARRAY_SIZE(supported_sample_rates),
+ .list = supported_sample_rates,
+ .mask = 0,
+};
+
+static void event_handler(uint32_t opcode, uint32_t token,
+ uint32_t *payload, void *priv)
+{
+ struct q6asm_dai_rtd *prtd = priv;
+ struct snd_pcm_substream *substream = prtd->substream;
+
+ switch (opcode) {
+ case ASM_CLIENT_EVENT_CMD_RUN_DONE:
Need to add support for V2 version of opcodes
Makes sense, I will add them.
+ q6asm_write_async(prtd->audio_client,
+ prtd->pcm_count, 0, 0, NO_TIMESTAMP);
+ break;
+ case ASM_CLIENT_EVENT_CMD_EOS_DONE:
+ prtd->state = Q6ASM_STREAM_STOPPED;
+ break;
+ case ASM_CLIENT_EVENT_DATA_WRITE_DONE: {
+ prtd->pcm
[..]
+
+static int q6asm_dai_trigger(struct snd_pcm_substream *substream, int
cmd)
+{
+ int ret = 0;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+ break;
below two cases can be combined with START if no change
Yep, I will do that in next version.
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ prtd->state = Q6ASM_STREAM_STOPPED;
+ ret = q6asm_cmd_nowait(prtd->audio_client, CMD_EOS);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ret = q6asm_cmd_nowait(prtd->audio_client, CMD_PAUSE);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int q6asm_dai_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = soc_prtd->cpu_dai;
+
+ struct q6asm_dai_rtd *prtd;
+ struct q6asm_dai_data *pdata;
+ struct device *dev = soc_prtd->platform->dev;
+ int ret = 0;
+ int stream_id;
+
+ stream_id = cpu_dai->driver->id;
+
+ pdata = q6asm_get_dai_data(dev);
+ if (!pdata) {
+ pr_err("Platform data not found ..\n");
+ return -EINVAL;
+ }
+
+ prtd = kzalloc(sizeof(struct q6asm_dai_rtd), GFP_KERNEL);
+ if (prtd == NULL)
+ return -ENOMEM;
+
+ prtd->substream = substream;
+ prtd->audio_client = q6asm_audio_client_alloc(dev,
+ (q6asm_cb)event_handler, prtd, stream_id);
+ if (!prtd->audio_client) {
+ pr_info("%s: Could not allocate memory\n", __func__);
+ kfree(prtd);
+ return -ENOMEM;
+ }
+
+// prtd->audio_client->dev = dev;
cleanup this
Sure!
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ runtime->hw = q6asm_dai_hardware_playback;
+
+ ret = snd_pcm_hw_constraint_list(runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &constraints_sample_rates);
[..]
+
+static int q6asm_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_pcm_substream *substream;
+ struct of_phandle_args args;
+ struct device_node *node;
+ struct q6asm_dai_data *pdata;
+ struct snd_pcm *pcm = rtd->pcm;
+ struct device *dev;
+ int size, ret;
+
+ dev = rtd->platform->dev->parent;
+ node = dev->of_node;
+ pdata = q6asm_get_dai_data(rtd->platform->dev);
+
+ ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
+ if (ret < 0)
+ pdata->sid = -1;
+ else
+ pdata->sid = args.args[0];
+
+
+
iommus for sdm845 is 16bit value. we need to have sid_mask which is 0x1
in sdm845. We need to mask sid with 0x1 to get proper sid.
pdata->sid &= 0x1;
Okay, I will take closer look at sdm845 and other socs, and make it more
generic in next version.
+ substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+ size = q6asm_dai_hardware_playback.buffer_bytes_max;
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size,
+ &substream->dma_buffer);
+ if (ret)
+ dev_err(dev, "Cannot allocate buffer(s)\n");
+
+ return ret;
+}
+
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
