Currently each message length in complete transfer is being checked for determining DMA mode and if any of the message length is less than FIFO length then non DMA mode is being used which will increase overhead. DMA can be used for any length and it should be determined with complete transfer length. Now, this patch introduces DMA threshold length and the transfer will be done in DMA mode if the total length is greater than this threshold length. Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-qup.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 6227a5c..a91fc70 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -192,6 +192,8 @@ struct qup_i2c_dev { bool is_dma; /* To check if the current transfer is using DMA */ bool use_dma; + /* The threshold length above which DMA will be used */ + unsigned int dma_threshold; struct dma_pool *dpool; struct qup_i2c_tag start_tag; struct qup_i2c_bam brx; @@ -1294,7 +1296,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, int num) { struct qup_i2c_dev *qup = i2c_get_adapdata(adap); - int ret, len, idx = 0; + int ret, idx = 0; + unsigned int total_len = 0; qup->bus_err = 0; qup->qup_err = 0; @@ -1320,14 +1323,13 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, goto out; } - len = (msgs[idx].len > qup->out_fifo_sz) || - (msgs[idx].len > qup->in_fifo_sz); - - if (is_vmalloc_addr(msgs[idx].buf) || !len) + if (is_vmalloc_addr(msgs[idx].buf)) break; + + total_len += msgs[idx].len; } - if (idx == num) + if (idx == num && total_len > qup->dma_threshold) qup->use_dma = true; } @@ -1587,6 +1589,7 @@ static int qup_i2c_probe(struct platform_device *pdev) size = QUP_INPUT_FIFO_SIZE(io_mode); qup->in_fifo_sz = qup->in_blk_sz * (2 << size); + qup->dma_threshold = min(qup->out_fifo_sz, qup->in_fifo_sz); fs_div = ((src_clk_freq / clk_freq) / 2) - 3; hs_div = 3; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html