Changes in v2: * Changed usage of clk_hw_is_prepared() to __clk_is_enabled() in clk_rcg2_shared_ops to fix build test error. Changes in v1: This patch series does the miscellaneous changes for RCGs used in SDM845. 1. Clear hardware clock control bit of RCGs where HW clock control bit is set by default so that software can control those root clocks. 2. Introduces clk_rcg2_shared_ops to support clock controller drivers for SDM845. With new shared ops, RCGs with shared branches will be configured to a safe source in disable path and actual RCG update configuration will be done in enable path instead of doing config update in set_rate. In set_rate(), just cache the rate instead of doing actual configuration update. Also each RCG in clock controller driver will have their own safe configuration frequency table to switch to safe frequency. Amit Nischal (2): clk: qcom: Clear hardware clock control bit of RCG clk: qcom: Configure the RCGs to a safe source as needed drivers/clk/qcom/clk-rcg.h | 8 ++- drivers/clk/qcom/clk-rcg2.c | 154 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 159 insertions(+), 3 deletions(-) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
