On Wed 01 Nov 10:53 PDT 2017, Damien Riegel wrote:
> The QUP core can be used either for I2C or SPI, so the same IP is mapped
> by a driver or the other. SPI bindings use a leading 0 for the start
> address and a size of 0x600, I2C bindings don't have the leading 0 and
> have a size 0x1000.
>
> To make them more similar, add the leading 0 to I2C bindings and changes
> the size to 0x600, as the driver only accesses registers up to address
> 0x408. Also align the second entry of the clocks array.
>
The correct size for these blocks are 0x500, please update this. Other
than that this looks good.
Regards,
Bjorn
> Signed-off-by: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index e16ba8334518..de25bd6070f5 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -457,10 +457,10 @@
>
> blsp_i2c2: i2c@78b6000 {
> compatible = "qcom,i2c-qup-v2.2.1";
> - reg = <0x78b6000 0x1000>;
> + reg = <0x078b6000 0x600>;
> interrupts = <GIC_SPI 96 0>;
> clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
> + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
> clock-names = "iface", "core";
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c2_default>;
> @@ -472,10 +472,10 @@
>
> blsp_i2c4: i2c@78b8000 {
> compatible = "qcom,i2c-qup-v2.2.1";
> - reg = <0x78b8000 0x1000>;
> + reg = <0x078b8000 0x600>;
> interrupts = <GIC_SPI 98 0>;
> clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
> + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
> clock-names = "iface", "core";
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c4_default>;
> @@ -487,10 +487,10 @@
>
> blsp_i2c6: i2c@78ba000 {
> compatible = "qcom,i2c-qup-v2.2.1";
> - reg = <0x78ba000 0x1000>;
> + reg = <0x078ba000 0x600>;
> interrupts = <GIC_SPI 100 0>;
> clocks = <&gcc GCC_BLSP1_AHB_CLK>,
> - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
> + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
> clock-names = "iface", "core";
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c6_default>;
> --
> 2.15.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
