On Wed 09 Aug 14:50 PDT 2017, Stephen Boyd wrote:
> On 08/09/2017 01:10 PM, Bjorn Andersson wrote:
> > On msm8916 and msm8996 boards a secure io-write is used to write the
> > magic for selecting "download mode", specify this address in the
> > DeviceTree.
> >
> > Note that qcom_scm.download_mode=1 must be specified on the kernel
> > command line for the kernel to attempt selecting download mode.
> >
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 ++
> > arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 +++++++
> > 2 files changed, 9 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > index 039991f80831..b7197f2e7209 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> > @@ -241,6 +241,8 @@
> > clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
> > clock-names = "core", "bus", "iface";
> > #reset-cells = <1>;
> > +
> > + qcom,dload-mode = <&tcsr>;
> > };
> > };
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > index 8f085716e258..2eee6a33f22b 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > @@ -261,6 +261,8 @@
> > firmware {
> > scm {
> > compatible = "qcom,scm-msm8996";
> > +
> > + qcom,dload-mode = <&tcsr>;
>
> We don't need an offset into tcsr?
>
Of course we do, this only worked with my previous (and incorrect) tcsr
definition - not the one I ended up including in the patch.
Thanks,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
