On Thu, May 18, 2017 at 01:59:26PM +0100, Suzuki K Poulose wrote:
> On Tue, May 09, 2017 at 10:49:53AM +0800, Leo Yan wrote:
> > ARMv8 architecture reference manual (ARM DDI 0487A.k) Chapter H7 "The
> > Sample-based Profiling Extension" has description for sampling
> > registers, we can utilize these registers to check program counter
> > value with combined CPU exception level, secure state, etc. So this is
> > helpful for CPU lockup bugs, e.g. if one CPU has run into infinite loop
> > with IRQ disabled; the 'hang' CPU cannot switch context and handle any
> > interrupt, so it cannot handle SMP call for stack dump, etc.
> >
> > This patch series is to enable coresight debug module with sample-based
> > registers and register call back notifier for PCSR register dumping
> > when panic happens, so we can see below dumping info for panic; and
> > this patch series has considered the conditions for access permission
> > for debug registers self, so this can avoid access debug registers when
> > CPU power domain is off; the driver also try to figure out the CPU is
> > in secure or non-secure state.
> >
> > Patch 0001 is to document the dt binding; patch 0002 adds one detailed
> > document to describe the Coresight debug module implementation, the
> > clock and power domain impaction on the driver, some examples for usage.
> >
> > Patch 0003 is to document boot parameters used in kernel command line.
> >
> > Patch 0004 is to add file entries for MAINTAINERS.
> >
> > Patch 0005 is used to fix the func of_get_coresight_platform_data()
> > doesn't properly drop the reference to the CPU node pointer; and
> > patch 0006 is refactor to add new function of_coresight_get_cpu().
> >
> > Patch 0007 is the driver for CPU debug module.
> >
> > Patch 0008 in this series are to enable debug unit on 96boards Hikey,
> > Patch 0009 is to enable debug on 96boards DB410c. Have verified on both
> > two boards.
>
> Leo,
>
> Please could you include the following patch in your series, which adds
> the DT nodes for CPU debug on Juno boards ?
Sure, glad to include it. Sorry for delay, hope can catch up for
this merge window.
> ----8>----
> From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> Date: Tue, 28 Mar 2017 13:40:24 +0100
> Subject: [PATCH] arm64: dts: juno: Add Coresight CPU debug nodes
>
> Add Coresight CPU debug nodes for Juno r0, r1 & r2. The CPU
> debug areas are mapped at the same address for all revisions,
> like the ETM, even though the CPUs have changed from r1 to r2.
>
> Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
> Cc: Leo Yan <leo.yan@xxxxxxxxxx>
> Cc: Mathieu Poirier <mathieu.porier@xxxxxxxxxx>
> Cc: Liviu Dudau <liviu.dudau@xxxxxxx>
> Signed-off-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
> ---
> arch/arm64/boot/dts/arm/juno-base.dtsi | 54 ++++++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/arm/juno-r1.dts | 24 +++++++++++++++
> arch/arm64/boot/dts/arm/juno-r2.dts | 24 +++++++++++++++
> arch/arm64/boot/dts/arm/juno.dts | 24 +++++++++++++++
> 4 files changed, 126 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> index df539e8..0613aed 100644
> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> @@ -216,6 +216,15 @@
> };
> };
>
> + cpu_debug0: cpu_debug@22010000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x22010000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> funnel@220c0000 { /* cluster0 funnel */
> compatible = "arm,coresight-funnel", "arm,primecell";
> reg = <0 0x220c0000 0 0x1000>;
> @@ -266,6 +275,15 @@
> };
> };
>
> + cpu_debug1: cpu_debug@22110000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x22110000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> etm2: etm@23040000 {
> compatible = "arm,coresight-etm4x", "arm,primecell";
> reg = <0 0x23040000 0 0x1000>;
> @@ -280,6 +298,15 @@
> };
> };
>
> + cpu_debug2: cpu_debug@23010000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x23010000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> funnel@230c0000 { /* cluster1 funnel */
> compatible = "arm,coresight-funnel", "arm,primecell";
> reg = <0 0x230c0000 0 0x1000>;
> @@ -344,6 +371,15 @@
> };
> };
>
> + cpu_debug3: cpu_debug@23110000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x23110000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> etm4: etm@23240000 {
> compatible = "arm,coresight-etm4x", "arm,primecell";
> reg = <0 0x23240000 0 0x1000>;
> @@ -358,6 +394,15 @@
> };
> };
>
> + cpu_debug4: cpu_debug@23210000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x23210000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> etm5: etm@23340000 {
> compatible = "arm,coresight-etm4x", "arm,primecell";
> reg = <0 0x23340000 0 0x1000>;
> @@ -372,6 +417,15 @@
> };
> };
>
> + cpu_debug5: cpu_debug@23310000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0 0x23310000 0 0x1000>;
> +
> + clocks = <&soc_smc50mhz>;
> + clock-names = "apb_pclk";
> + power-domains = <&scpi_devpd 0>;
> + };
> +
> replicator@20120000 {
> compatible = "qcom,coresight-replicator1x", "arm,primecell";
> reg = <0 0x20120000 0 0x1000>;
> diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
> index 0033c59..d6a4cda 100644
> --- a/arch/arm64/boot/dts/arm/juno-r1.dts
> +++ b/arch/arm64/boot/dts/arm/juno-r1.dts
> @@ -239,3 +239,27 @@
> &stm_out_port {
> remote-endpoint = <&csys1_funnel_in_port0>;
> };
> +
> +&cpu_debug0 {
> + cpu = <&A57_0>;
> +};
> +
> +&cpu_debug1 {
> + cpu = <&A57_1>;
> +};
> +
> +&cpu_debug2 {
> + cpu = <&A53_0>;
> +};
> +
> +&cpu_debug3 {
> + cpu = <&A53_1>;
> +};
> +
> +&cpu_debug4 {
> + cpu = <&A53_2>;
> +};
> +
> +&cpu_debug5 {
> + cpu = <&A53_3>;
> +};
> diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
> index 218d0e4..38a8ad6 100644
> --- a/arch/arm64/boot/dts/arm/juno-r2.dts
> +++ b/arch/arm64/boot/dts/arm/juno-r2.dts
> @@ -239,3 +239,27 @@
> &stm_out_port {
> remote-endpoint = <&csys1_funnel_in_port0>;
> };
> +
> +&cpu_debug0 {
> + cpu = <&A72_0>;
> +};
> +
> +&cpu_debug1 {
> + cpu = <&A72_1>;
> +};
> +
> +&cpu_debug2 {
> + cpu = <&A53_0>;
> +};
> +
> +&cpu_debug3 {
> + cpu = <&A53_1>;
> +};
> +
> +&cpu_debug4 {
> + cpu = <&A53_2>;
> +};
> +
> +&cpu_debug5 {
> + cpu = <&A53_3>;
> +};
> diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> index bb2820e..9f37dbb 100644
> --- a/arch/arm64/boot/dts/arm/juno.dts
> +++ b/arch/arm64/boot/dts/arm/juno.dts
> @@ -226,3 +226,27 @@
> };
> };
> };
> +
> +&cpu_debug0 {
> + cpu = <&A57_0>;
> +};
> +
> +&cpu_debug1 {
> + cpu = <&A57_1>;
> +};
> +
> +&cpu_debug2 {
> + cpu = <&A53_0>;
> +};
> +
> +&cpu_debug3 {
> + cpu = <&A53_1>;
> +};
> +
> +&cpu_debug4 {
> + cpu = <&A53_2>;
> +};
> +
> +&cpu_debug5 {
> + cpu = <&A53_3>;
> +};
> --
> 2.7.4
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
