On Fri 05 May 13:22 PDT 2017, Jassi Brar wrote: > On Sat, May 6, 2017 at 1:23 AM, Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx> wrote: > > On 5/5/2017 1:22 PM, Jassi Brar wrote: > >> > >> On Sat, May 6, 2017 at 12:07 AM, Bjorn Andersson > >> <bjorn.andersson@xxxxxxxxxx> wrote: > >>> > > > > There is no way to determine if the remote processor has observed a message, > > that does not involve pretty trivial race conditions. > > > Thanks for chiming in. > How is it supposed to work if a client queues more than one request? One such example is found in patch 5 in this series. There are two FIFOs in shared memory, one in each direction. Each fifo has a index-pair associated; a write-index is used by the writer to inform the reader where the valid data in the ring buffer ends and a read-index indicates to the writer how far behind the read is. The writer will just push data into the FIFO, each time firing off an APCS IPC interrupt and when the remote interrupt handler runs it will consume all the messages from the read-index to the write-index. All without the need for the reader to signal the writer that it has received the interrupts. In the event that the write-index catches up with the read-index a dedicated flag is set which will cause the reader to signal that the read-index is updated - allowing the writer to sleep waiting for room in the FIFO. > How do you know when it's ok to overwrite the FIFO and send the next > command? As long as there's enough space between the write-index and the read-index we can write. And we don't need any locks, because the writer is the only one changing the write-index and the reader is the only one changing the read index. > Usually if h/w doesn't indicate, we cook up some ack packet for each > command. Otherwise the protocol seems badly broken. > > If there is really nothing that can be done to check delivery of a > message, I'll pick the driver as such. Best of luck :) The protocols implemented on top will guarantee this, as needed, so it's fine :) I'll update patch 1 and repost patch 1 through 3 for you to merge in the mailbox tree, patch 4 and 5 I'll pull into the rpmsg tree once I have received some additional feedback. (We don't have any build time dependencies between the two, so it's better to merge each driver through their respective tree) Thanks, Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
