On Tue, May 02, 2017 at 04:30:03PM +0800, Leo Yan wrote:
[...]
> +static void debug_force_cpu_powered_up(struct debug_drvdata *drvdata)
> +{
> + u32 edprcr;
> +
> +try_again:
> +
> + /*
> + * Send request to power management controller and assert
> + * DBGPWRUPREQ signal; if power management controller has
> + * sane implementation, it should enable CPU power domain
> + * in case CPU is in low power state.
> + */
> + edprcr = readl_relaxed(drvdata->base + EDPRCR);
> + edprcr |= EDPRCR_COREPURQ;
> + writel_relaxed(edprcr, drvdata->base + EDPRCR);
> +
> + /* Wait for CPU to be powered up (timeout~=32ms) */
> + if (readx_poll_timeout_atomic(readl_relaxed, drvdata->base + EDPRSR,
> + drvdata->edprsr, (drvdata->edprsr & EDPRSR_PU),
> + DEBUG_WAIT_SLEEP, DEBUG_WAIT_TIMEOUT)) {
> + /*
> + * Unfortunately the CPU cannot be powered up, so return
> + * back and later has no permission to access other
> + * registers. For this case, should disable CPU low power
> + * states to ensure CPU power domain is enabled!
> + */
> + pr_err("%s: power up request for CPU%d failed\n",
> + __func__, drvdata->cpu);
> + return;
> + }
> +
> + /*
> + * At this point the CPU is powered up, so set the no powerdown
> + * request bit so we don't lose power and emulate power down.
> + */
> + edprcr = readl_relaxed(drvdata->base + EDPRCR);
> + edprcr |= EDPRCR_COREPURQ | EDPRCR_CORENPDRQ;
> + writel_relaxed(edprcr, drvdata->base + EDPRCR);
> +
> + drvdata->edprsr = readl_relaxed(drvdata->base + EDPRSR);
> +
> + /* The core power domain got switched off on use, try again */
> + if (unlikely(!drvdata->edprsr & EDPRSR_PU))
Here have error introduced by operator priority. Should change to
if (unlikely(!(drvdata->edprsr & EDPRSR_PU)))
Will send new version soon for this fixing.
> + goto try_again;
> +}
[...]
Thanks,
Leo Yan
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
