Signed-off-by: Bastian Köcher <git@xxxxxxx> --- Patch for enabling Nexus 6P(msm8994) SDHCI support. The patch is based on the work of Jeremy McNicoll for the Nexus 5x: https://www.spinics.net/lists/linux-arm-msm/msg24827.html .../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 262 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 82 +++++++ arch/arm64/boot/dts/qcom/msm8994.dtsi | 154 ++++++++++-- 3 files changed, 483 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index dfa08f513dc4..d0bf9072b614 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -38,3 +38,265 @@ }; }; }; + +&smd_rpm { + rpm { + rpm_requests { + pm8994-regulators { + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + /*vin_lvs1_2 = <&pm8994_s4>; */ + + s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + s2 { + }; + + s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + proxy-supply = <&pm8994_l12>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <2950000>; + status = "okay"; + }; + + l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + proxy-supply = <&pm8994_l14>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + qcom,init-voltage = <3000000>; + qcom,init-ldo-mode = <1>; + }; + + l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,init-voltage = <1800000>; + }; + + l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + qcom,init-voltage = <3100000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + qcom,init-voltage = <3075000>; + }; + + l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + qcom,init-voltage = <1050000>; + }; + + l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <1000000>; + proxy-supply = <&pm8994_l28>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + }; + + l29 { + /* TODO: Unsupported voltage range.. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + qcom,init-voltage = <1262500>; + }; + + l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi index 0e4eea0df25d..66c46b8f9e83 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi @@ -35,4 +35,86 @@ bias-pull-down; }; }; + + /* 0-3 for sdc1 4-6 for sdc2 */ + /* Order of pins */ + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ + pmx_sdc1_clk { + sdc1_clk_on: clk_on { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <16>; /* 16mA */ + }; + }; + sdc1_clk_off: clk_off { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <2>; /* 2mA */ + }; + }; + }; + + pmx_sdc1_cmd { + sdc1_cmd_on: cmd_on { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + }; + sdc1_cmd_off: cmd_off { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up = <0x3>; /* same as 3.10 ?? */ + drive-strength = <2>; /* 2mA */ + }; + }; + }; + + pmx_sdc1_data { + sdc1_data_on: data_on { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; /* 8mA */ + }; + }; + sdc1_data_off: data_off { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_rclk { + sdc1_rclk_on: rclk_on { + bias-pull-down; /* pull down */ + }; + sdc1_rclk_off: rclk_off { + bias-pull-down; /* pull down */ + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index f33c41d01c86..703888d608c6 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -73,6 +73,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f900d000 { + compatible = "syscon"; + reg = <0xf900d000 0x2000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -156,11 +161,6 @@ <&clock_gcc GCC_BLSP1_AHB_CLK>; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; - clock_gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8994"; #clock-cells = <1>; @@ -168,6 +168,75 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; }; + + sdhci1: mmc@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, + <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, + <&clock_gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + vdd-supply = <&pm8994_l20>; + qcom,vdd-voltage-level = <2950000 2950000>; + qcom,vdd-current-level = <200 570000>; + + vdd-io-supply = <&pm8994_s4>; + qcom,vdd-io-voltage-level = <1800000 1800000>; + qcom,vdd-io-current-level = <200 325000>; + + regulator-always-on; + bus-width = <8>; + mmc-hs400-1_8v; + status = "okay"; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + sfpb_mutex_regs: syscon@fd484000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "syscon"; + reg = <0xfd484000 0x400>; + }; + + sfpb_mutex: hwmutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_regs 0x0 0x100>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&sfpb_mutex 3>; + }; }; memory { @@ -193,22 +262,77 @@ #size-cells = <2>; ranges; - smem_mem: smem_region@6a00000 { + smem_region: smem@6a00000 { reg = <0x0 0x6a00000 0x0 0x200000>; no-map; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x80>; - #hwlock-cells = <1>; - }; + smd_rpm: smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm_requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + /* TODO: update when rpmcc-msm8994 support added */ + compatible = "qcom,rpmcc-msm8916", + "qcom,rpmcc"; + #clock-cells = <1>; + }; - qcom,smem@6a00000 { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; + smd_rpm_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + }; + }; + }; }; }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
