On 2016-10-27 5:11 PM, Stephen Boyd wrote:
On 10/25, Jeremy McNicoll wrote:
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5dd05de..439e40e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,6 +1,8 @@
-dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
This is unrelated. Perhaps make another patch to "correct" it.
I rolled it into this change series as I was asked in previous feedback
to make them 1 per line.
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
new file mode 100644
index 0000000..8bbf4f3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -0,0 +1,191 @@
+
+ soc: soc {
Do we need the soc phandle? If it isn't used we should leave it
out.
What about doing something like:
8992soc: soc {
This will allow it to be overriden. Or would it be best to add it when
someone wants / needs to override it.
+
+ clock_gcc: qcom,gcc@fc400000 {
s/qcom,gcc/clock-controller/
done.
Also we typically just give it a "gcc" phandle to be terse.
is clock_gcc not a little more descriptive from a human perspective?
Sometimes being terse is hard for humans to parse.
+ compatible = "qcom,gcc-8994";
qcom,gcc-msm8994
agreed.
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x2000>;
+ };
+ };
+
+ memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ device_type = "memory";
+ reg = <0 0 0 0>; // bootloader will update
+ };
+
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "sleep_clk";
clock-output-names can be removed because we use the same string
as the node name.
one less line works for me.
-jeremy
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
