On Wed 02 Nov 03:06 PDT 2016, Imran Khan wrote:
> The SoC info driver provides information such as Chip ID,
> Chip family, serial number and other such details about
> Qualcomm SoCs.
>
> Signed-off-by: Imran Khan <kimran@xxxxxxxxxxxxxx>
[..]
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index fdd664e..b4fb8f8 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -2,7 +2,7 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
> obj-$(CONFIG_QCOM_PM) += spm.o
> obj-$(CONFIG_QCOM_SMD) += smd.o
> obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o
> -obj-$(CONFIG_QCOM_SMEM) += smem.o
> +obj-$(CONFIG_QCOM_SMEM) += smem.o socinfo.o
This should be something like:
obj-$(CONFIG_QCOM_SMEM) += qcom_smem.o
qcom_smem-y = smem.o
qcom_smem-y = socinfo.o
Otherwise this is treated as two different modules.
> obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
> index 18ec52f..05ff935 100644
> --- a/drivers/soc/qcom/smem.c
> +++ b/drivers/soc/qcom/smem.c
> @@ -85,6 +85,12 @@
> /* Max number of processors/hosts in a system */
> #define SMEM_HOST_COUNT 9
>
> +/*
> + * Shared memory identifiers, used to acquire handles to respective memory
> + * region.
> + */
> +#define SMEM_HW_SW_BUILD_ID 137
Move to socinfo.c
> +
> /**
> * struct smem_proc_comm - proc_comm communication struct (legacy)
> * @command: current command to be executed
> @@ -695,7 +701,8 @@ static int qcom_smem_probe(struct platform_device *pdev)
> {
> struct smem_header *header;
> struct qcom_smem *smem;
> - size_t array_size;
> + void *socinfo;
> + size_t array_size, size;
> int num_regions;
> int hwlock_id;
> u32 version;
> @@ -751,6 +758,15 @@ static int qcom_smem_probe(struct platform_device *pdev)
>
> __smem = smem;
>
> + socinfo = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID,
> + &size);
> + if (IS_ERR(socinfo)) {
> + dev_warn(&pdev->dev,
> + "Can't find SMEM_HW_SW_BUILD_ID; falling back on dummy values.\n");
> + socinfo = setup_dummy_socinfo();
> + }
> + qcom_socinfo_init(socinfo, size);
> +
Please just replace this with an unconditional qcom_socinfo_init() call
and make it acquire the smem item and initialize itself.
And rather than setting up a dummy socinfo I think you should either not
register the soc_device or make it up of the information we know. I see
no point in exposing the value "Unknown" in various forms - better to
just hide the attributes.
> return 0;
> }
>
> diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
[..]
> +/*
> + * SOC Info Routines
This comment doesn't add any value.
> + *
> + */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
Now that this lives inside the smem driver you can pass the smem device
* and replace all pr_ with dev_ equivalents.
> +
> +#include <linux/export.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/sys_soc.h>
> +#include <linux/slab.h>
> +#include <linux/stat.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +#include <linux/random.h>
> +#include <linux/soc/qcom/smem.h>
> +
> +/*
> + * SOC version type with major number in the upper 16 bits and minor
> + * number in the lower 16 bits. For example:
> + * 1.0 -> 0x00010000
> + * 2.3 -> 0x00020003
> + */
> +#define SOCINFO_VERSION_MAJOR(ver) (((ver) & 0xffff0000) >> 16)
> +#define SOCINFO_VERSION_MINOR(ver) ((ver) & 0x0000ffff)
These actually represents the socinfo->version, so this is fine.
> +#define SOCINFO_VERSION(maj, min) ((((maj) & 0xffff) << 16)|((min) & 0xffff))
But this is socinfo->format, which always has major == 0. So there's no
need for this complexity until you actually bump the major. Just use the
(minor) "format" directly and drop this.
> +
> +#define PLATFORM_SUBTYPE_MDM 1
Unused.
> +#define PLATFORM_SUBTYPE_INTERPOSERV3 2
Unused.
> +#define PLATFORM_SUBTYPE_SGLTE 6
Unused.
> +
> +#define SMEM_SOCINFO_BUILD_ID_LENGTH 32
> +#define SMEM_IMAGE_VERSION_BLOCKS_COUNT 32
> +#define SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE 128
> +#define SMEM_IMAGE_VERSION_SIZE 4096
You only need two of the count, block size and total size...
> +#define SMEM_IMAGE_VERSION_NAME_SIZE 75
> +#define SMEM_IMAGE_VERSION_VARIANT_SIZE 20
> +#define SMEM_IMAGE_VERSION_VARIANT_OFFSET 75
> +#define SMEM_IMAGE_VERSION_OEM_SIZE 32
> +#define SMEM_IMAGE_VERSION_OEM_OFFSET 96
Please throw these into a:
struct image_version {
char name[75];
char variant[20];
char pad;
char oem[32];
};
This allows you to describe the version SMEM item just as an array of
SMEM_IMAGE_VERSION_BLOCKS_COUNT image_version objects - i.e. the
compiler will take care of doing the math for you.
> +#define SMEM_IMAGE_VERSION_PARTITION_APPS 10
> +#define SMEM_ITEM_SIZE_ALIGN 8
4096 is already aligned, so you don't need this.
> +
> +/*
> + * Shared memory identifiers, used to acquire handles to respective memory
> + * region.
> + */
> +#define SMEM_IMAGE_VERSION_TABLE 469
> +
> +/*
> + * Qcom SoC types
> + */
> +enum qcom_cpu {
> + MSM_CPU_UNKNOWN = 0,
> + MSM_CPU_8960,
> + MSM_CPU_8960AB,
> + MSM_CPU_8064,
> + MSM_CPU_8974,
> + MSM_CPU_8974PRO_AA,
> + MSM_CPU_8974PRO_AB,
> + MSM_CPU_8974PRO_AC,
> + MSM_CPU_8916,
> + MSM_CPU_8084,
> + MSM_CPU_8996
> +};
> +
> +/*
> + * Qcom SoC IDs
> + */
> +enum qcom_cpu_id {
> + MSM_UNKNOWN_ID,
> + MSM_8960_ID = 87,
> + APQ_8064_ID = 109,
> + MSM_8660A_ID = 122,
> + MSM_8260A_ID,
> + APQ_8060A_ID,
> + MSM_8974_ID = 126,
> + MPQ_8064_ID = 130,
> + MSM_8960AB_ID = 138,
> + APQ_8060AB_ID,
> + MSM_8260AB_ID,
> + MSM_8660AB_ID,
> + APQ_8084_ID = 178,
> + APQ_8074_ID = 184,
> + MSM_8274_ID,
> + MSM_8674_ID,
> + MSM_8974PRO_ID = 194,
> + MSM_8916_ID = 206,
> + APQ_8074_AA_ID = 208,
> + APQ_8074_AB_ID,
> + APQ_8074PRO_ID,
> + MSM_8274_AA_ID,
> + MSM_8274_AB_ID,
> + MSM_8274PRO_ID,
> + MSM_8674_AA_ID,
> + MSM_8674_AB_ID,
> + MSM_8674PRO_ID,
> + MSM_8974_AA_ID,
> + MSM_8974_AB_ID,
> + MSM_8996_ID = 246,
> + APQ_8016_ID,
> + MSM_8216_ID,
> + MSM_8116_ID,
> + MSM_8616_ID,
> + APQ8096_ID = 291,
> + MSM_8996SG_ID = 305,
> + MSM_8996AU_ID = 310,
> + APQ_8096AU_ID,
> + APQ_8096SG_ID
These values are only ever used one time, so I think it would be more
readable if you just insert their numeric values into the cpu_of_id
directly.
Compare
[APQ_8096SG_ID] = {MSM_CPU_8996, "APQ8096SG"},
with:
[312] = { MSM_CPU_8996, "APQ8096SG" },
They mean the same to the compiler, but saves us all from having to
add and follow the extra indirection when maintaining this.
> +};
> +
> +struct qcom_soc_info {
> + enum qcom_cpu generic_soc_type;
> + char *soc_id_string;
> +};
> +
> +enum qcom_pmic_model {
None of the values in this enum are used.
> + PMIC_MODEL_PM8058 = 13,
> + PMIC_MODEL_PM8028,
> + PMIC_MODEL_PM8901,
> + PMIC_MODEL_PM8027,
> + PMIC_MODEL_ISL_9519,
> + PMIC_MODEL_PM8921,
> + PMIC_MODEL_PM8018,
> + PMIC_MODEL_PM8015,
> + PMIC_MODEL_PM8014,
> + PMIC_MODEL_PM8821,
> + PMIC_MODEL_PM8038,
> + PMIC_MODEL_PM8922,
> + PMIC_MODEL_PM8917,
> + PMIC_MODEL_UNKNOWN = 0xFFFFFFFF
> +};
> +
> +enum hw_platform_type {
> + HW_PLATFORM_UNKNOWN,
> + HW_PLATFORM_SURF,
> + HW_PLATFORM_FFA,
> + HW_PLATFORM_FLUID,
> + HW_PLATFORM_SVLTE_FFA,
> + HW_PLATFORM_SVLTE_SURF,
> + HW_PLATFORM_MTP_MDM = 7,
> + HW_PLATFORM_MTP,
> + HW_PLATFORM_LIQUID,
> + /* Dragonboard platform id is assigned as 10 in CDT */
> + HW_PLATFORM_DRAGON,
> + HW_PLATFORM_QRD,
> + HW_PLATFORM_HRD = 13,
> + HW_PLATFORM_DTV,
> + HW_PLATFORM_RCM = 21,
> + HW_PLATFORM_STP = 23,
> + HW_PLATFORM_SBC,
> + HW_PLATFORM_INVALID
Just inline these values into hw_platform, makes it easier to read.
> +};
> +
> +enum accessory_chip_type {
> + ACCESSORY_CHIP_UNKNOWN = 0,
> + ACCESSORY_CHIP_CHARM = 58
Unused
> +};
> +
> +enum qrd_platform_subtype {
Please inline values into qrd_hw_platform_subtype.
> + PLATFORM_SUBTYPE_QRD,
> + PLATFORM_SUBTYPE_SKUAA,
> + PLATFORM_SUBTYPE_SKUF,
> + PLATFORM_SUBTYPE_SKUAB,
> + PLATFORM_SUBTYPE_SKUG = 0x5,
> + PLATFORM_SUBTYPE_QRD_INVALID
> +};
> +
> +enum platform_subtype {
> + PLATFORM_SUBTYPE_UNKNOWN,
> + PLATFORM_SUBTYPE_CHARM,
> + PLATFORM_SUBTYPE_STRANGE,
> + PLATFORM_SUBTYPE_STRANGE_2A,
> + PLATFORM_SUBTYPE_INVALID
Please inline these into hw_platform_subtype.
> +};
> +
> +#ifdef CONFIG_SOC_BUS
Just add "select SOC_BUS" to the SMEM Kconfig
> +static const char *hw_platform[] = {
> + [HW_PLATFORM_UNKNOWN] = "Unknown",
> + [HW_PLATFORM_SURF] = "Surf",
> + [HW_PLATFORM_FFA] = "FFA",
> + [HW_PLATFORM_FLUID] = "Fluid",
> + [HW_PLATFORM_SVLTE_FFA] = "SVLTE_FFA",
> + [HW_PLATFORM_SVLTE_SURF] = "SLVTE_SURF",
> + [HW_PLATFORM_MTP_MDM] = "MDM_MTP_NO_DISPLAY",
> + [HW_PLATFORM_MTP] = "MTP",
> + [HW_PLATFORM_RCM] = "RCM",
> + [HW_PLATFORM_LIQUID] = "Liquid",
> + [HW_PLATFORM_DRAGON] = "Dragon",
> + [HW_PLATFORM_QRD] = "QRD",
> + [HW_PLATFORM_HRD] = "HRD",
> + [HW_PLATFORM_DTV] = "DTV",
> + [HW_PLATFORM_STP] = "STP",
> + [HW_PLATFORM_SBC] = "SBC",
> +};
> +
> +static const char *qrd_hw_platform_subtype[] = {
> + [PLATFORM_SUBTYPE_QRD] = "QRD",
> + [PLATFORM_SUBTYPE_SKUAA] = "SKUAA",
> + [PLATFORM_SUBTYPE_SKUF] = "SKUF",
> + [PLATFORM_SUBTYPE_SKUAB] = "SKUAB",
> + [PLATFORM_SUBTYPE_SKUG] = "SKUG",
> + [PLATFORM_SUBTYPE_QRD_INVALID] = "INVALID",
> +};
> +
> +static const char *hw_platform_subtype[] = {
> + [PLATFORM_SUBTYPE_UNKNOWN] = "Unknown",
> + [PLATFORM_SUBTYPE_CHARM] = "charm",
> + [PLATFORM_SUBTYPE_STRANGE] = "strange",
> + [PLATFORM_SUBTYPE_STRANGE_2A] = "strange_2a",
> + [PLATFORM_SUBTYPE_INVALID] = "Invalid",
> +};
> +#endif
> +
[..]
> +
> +static struct qcom_soc_info cpu_of_id[] = {
> +
> + [MSM_UNKNOWN_ID] = {MSM_CPU_UNKNOWN, "Unknown CPU"},
> +
> + /* 8x60 IDs */
> + [MSM_8960_ID] = {MSM_CPU_8960, "MSM8960"},
> +
> + /* 8x64 IDs */
> + [APQ_8064_ID] = {MSM_CPU_8064, "APQ8064"},
> + [MPQ_8064_ID] = {MSM_CPU_8064, "MPQ8064"},
> +
> + /* 8x60A IDs */
> + [MSM_8660A_ID] = {MSM_CPU_8960, "MSM8660A"},
> + [MSM_8260A_ID] = {MSM_CPU_8960, "MSM8260A"},
> + [APQ_8060A_ID] = {MSM_CPU_8960, "APQ8060A"},
> +
> + /* 8x74 IDs */
> + [MSM_8974_ID] = {MSM_CPU_8974, "MSM8974"},
> + [APQ_8074_ID] = {MSM_CPU_8974, "APQ8074"},
> + [MSM_8274_ID] = {MSM_CPU_8974, "MSM8274"},
> + [MSM_8674_ID] = {MSM_CPU_8974, "MSM8674"},
> +
> + /* 8x74AA IDs */
> + [APQ_8074_AA_ID] = {MSM_CPU_8974PRO_AA, "APQ8074-AA"},
> + [MSM_8274_AA_ID] = {MSM_CPU_8974PRO_AA, "MSM8274-AA"},
> + [MSM_8674_AA_ID] = {MSM_CPU_8974PRO_AA, "MSM8674-AA"},
> + [MSM_8974_AA_ID] = {MSM_CPU_8974PRO_AA, "MSM8974-AA"},
> +
> + /* 8x74AB IDs */
> + [APQ_8074_AB_ID] = {MSM_CPU_8974PRO_AB, "APQ8074-AB"},
> + [MSM_8274_AB_ID] = {MSM_CPU_8974PRO_AB, "MSM8274-AB"},
> + [MSM_8674_AB_ID] = {MSM_CPU_8974PRO_AB, "MSM8674-AB"},
> + [MSM_8974_AB_ID] = {MSM_CPU_8974PRO_AB, "MSM8974-AB"},
> +
> + /* 8x74AC IDs */
> + [MSM_8974PRO_ID] = {MSM_CPU_8974PRO_AC, "MSM8974PRO"},
> + [APQ_8074PRO_ID] = {MSM_CPU_8974PRO_AC, "APQ8074PRO"},
> + [MSM_8274PRO_ID] = {MSM_CPU_8974PRO_AC, "MSM8274PRO"},
> + [MSM_8674PRO_ID] = {MSM_CPU_8974PRO_AC, "MSM8674PRO"},
> +
> + /* 8x60AB IDs */
> + [MSM_8960AB_ID] = {MSM_CPU_8960AB, "MSM8960AB"},
> + [APQ_8060AB_ID] = {MSM_CPU_8960AB, "APQ8060AB"},
> + [MSM_8260AB_ID] = {MSM_CPU_8960AB, "MSM8260AB"},
> + [MSM_8660AB_ID] = {MSM_CPU_8960AB, "MSM8660AB"},
> +
> + /* 8x84 IDs */
> + [APQ_8084_ID] = {MSM_CPU_8084, "APQ8084"},
> +
> + /* 8x16 IDs */
> + [MSM_8916_ID] = {MSM_CPU_8916, "MSM8916"},
> + [APQ_8016_ID] = {MSM_CPU_8916, "APQ8016"},
> + [MSM_8216_ID] = {MSM_CPU_8916, "MSM8216"},
> + [MSM_8116_ID] = {MSM_CPU_8916, "MSM8116"},
> + [MSM_8616_ID] = {MSM_CPU_8916, "MSM8616"},
> +
> + /* 8x96 IDs */
> + [MSM_8996_ID] = {MSM_CPU_8996, "MSM8996"},
> + [MSM_8996AU_ID] = {MSM_CPU_8996, "MSM8996AU"},
> + [APQ_8096AU_ID] = {MSM_CPU_8996, "APQ8096AU"},
> + [APQ8096_ID] = {MSM_CPU_8996, "APQ8096"},
> + [MSM_8996SG_ID] = {MSM_CPU_8996, "MSM8996SG"},
> + [APQ_8096SG_ID] = {MSM_CPU_8996, "APQ8096SG"},
> +
> + /*
> + * Uninitialized IDs are not known to run Linux.
> + * MSM_CPU_UNKNOWN is set to 0 to ensure these IDs are
> + * considered as unknown CPU.
> + */
> +};
> +
> +static u32 socinfo_format;
> +
> +static struct socinfo_v0_1 dummy_socinfo = {
> + .format = SOCINFO_VERSION(0, 1),
> + .version = 1,
> +};
Drop the dummy, if you don't know the "build_id" then lets just not
expose a build id of "Unknown".
> +
> +#ifdef CONFIG_SOC_BUS
Select SOC_BUS
> +static int current_image;
> +static u32 socinfo_get_id(void);
> +
> +/* socinfo: sysfs functions */
> +
> +static char *socinfo_get_id_string(void)
> +{
> + return (socinfo) ? cpu_of_id[socinfo->v0_1.id].soc_id_string : NULL;
> +}
> +
> +static u32 socinfo_get_accessory_chip(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 5) ?
The numerous indirections used makes it non-obvious, but the associated
attribute will only be created if you have a socinfo and it's version >=
0.5.
So with some manual constant propagation this function does nothing more
than and as such serves no purpose being broken out from
qcom_get_accessory_chip() - just inline it.
return socinfo->v0_5.accessory_chip;
> + socinfo->v0_5.accessory_chip : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_foundry_id(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 9) ?
> + socinfo->v0_9.foundry_id : 0)
Dito
> + : 0;
> +}
> +
> +static u32 socinfo_get_chip_family(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 12) ?
> + socinfo->v0_12.chip_family : 0)
> + : 0;
Dito
> +}
> +
> +static u32 socinfo_get_raw_device_family(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 12) ?
> + socinfo->v0_12.raw_device_family : 0)
> + : 0;
Dito
> +}
> +
> +static u32 socinfo_get_raw_device_number(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 12) ?
> + socinfo->v0_12.raw_device_number : 0)
> + : 0;
Dito
> +}
> +
> +static char *socinfo_get_image_version_base_address(struct device *dev)
> +{
> + size_t size, size_in;
> + void *ptr;
> +
> + ptr = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_IMAGE_VERSION_TABLE,
> + &size);
> + if (IS_ERR(ptr))
> + return ptr;
> +
> + size_in = ALIGN(SMEM_IMAGE_VERSION_SIZE, SMEM_ITEM_SIZE_ALIGN);
4096 is an even power of 8, you don't need to align it.
> + if (size_in != size) {
> + dev_err(dev, "Wrong size for smem item\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + return ptr;
> +}
> +
> +
> +static u32 socinfo_get_version(void)
> +{
> + return (socinfo) ? socinfo->v0_1.version : 0;
> +}
> +
> +static char *socinfo_get_build_id(void)
> +{
> + return (socinfo) ? socinfo->v0_1.build_id : NULL;
> +}
> +
> +static u32 socinfo_get_raw_version(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 2) ?
> + socinfo->v0_2.raw_version : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_platform_type(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 3) ?
> + socinfo->v0_3.hw_platform : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_platform_version(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 4) ?
> + socinfo->v0_4.platform_version : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_platform_subtype(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 6) ?
> + socinfo->v0_6.hw_platform_subtype : 0)
> + : 0;
> +}
> +
> +static u32 socinfo_get_serial_number(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 10) ?
> + socinfo->v0_10.serial_number : 0)
> + : 0;
> +}
> +
> +static enum qcom_pmic_model socinfo_get_pmic_model(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 7) ?
> + socinfo->v0_7.pmic_model : PMIC_MODEL_UNKNOWN)
> + : PMIC_MODEL_UNKNOWN;
> +}
> +
> +static u32 socinfo_get_pmic_die_revision(void)
> +{
> + return socinfo ?
> + (socinfo_format >= SOCINFO_VERSION(0, 7) ?
> + socinfo->v0_7.pmic_die_revision : 0)
> + : 0;
> +}
> +
> +
> +static ssize_t
> +qcom_get_vendor(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "Qualcomm\n");
Per Documentation/filesystem/sysfs.txt, never use snprintf. Use
scnprintf() if you're unsure about the size of your data and sprintf()
otherwise.
> +}
> +
> +static ssize_t
> +qcom_get_raw_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_raw_version());
There's no need to line wrap these and that %u won't ever exceed
PAGE_SIZE, so feel free to use sprintf() if you feel the 80 char limit
is too close.
> +}
> +
> +static ssize_t
> +qcom_get_build_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%-.32s\n",
> + socinfo_get_build_id());
> +}
> +
> +static ssize_t
> +qcom_get_hw_platform(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 hw_type;
> +
> + hw_type = socinfo_get_platform_type();
> +
> + return snprintf(buf, PAGE_SIZE, "%-.32s\n",
> + hw_platform[hw_type]);
> +}
> +
> +static ssize_t
> +qcom_get_platform_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_platform_version());
> +}
> +
> +static ssize_t
> +qcom_get_accessory_chip(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_accessory_chip());
> +}
> +
> +static ssize_t
> +qcom_get_platform_subtype(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 hw_subtype;
> +
> + hw_subtype = socinfo_get_platform_subtype();
> + if (socinfo_get_platform_type() == HW_PLATFORM_QRD) {
> + if (hw_subtype >= PLATFORM_SUBTYPE_QRD_INVALID) {
> + pr_err("Invalid hardware platform sub type for qrd found\n");
This print doesn't help my user space application much, figure this
condition out during initialization and skip creating platform_subtype
if you don't know.
> + hw_subtype = PLATFORM_SUBTYPE_QRD_INVALID;
> + }
> + return snprintf(buf, PAGE_SIZE, "%-.32s\n",
> + qrd_hw_platform_subtype[hw_subtype]);
> + } else {
> + if (hw_subtype >= PLATFORM_SUBTYPE_INVALID) {
> + pr_err("Invalid hardware platform subtype\n");
> + hw_subtype = PLATFORM_SUBTYPE_INVALID;
> + }
> + return snprintf(buf, PAGE_SIZE, "%-.32s\n",
> + hw_platform_subtype[hw_subtype]);
> + }
> +}
> +
> +static ssize_t
> +qcom_get_platform_subtype_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + u32 hw_subtype;
> +
> + hw_subtype = socinfo_get_platform_subtype();
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + hw_subtype);
Drop the local variable and just put socinfo->v0_6.hw_platform_subtype
here.
> +}
> +
> +static ssize_t
> +qcom_get_foundry_id(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_foundry_id());
> +}
> +
> +static ssize_t
> +qcom_get_serial_number(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_serial_number());
> +}
> +
> +static ssize_t
> +qcom_get_chip_family(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "0x%x\n",
> + socinfo_get_chip_family());
> +}
> +
> +static ssize_t
> +qcom_get_raw_device_family(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "0x%x\n",
> + socinfo_get_raw_device_family());
> +}
> +
> +static ssize_t
> +qcom_get_raw_device_number(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "0x%x\n",
> + socinfo_get_raw_device_number());
> +}
> +
> +static ssize_t
> +qcom_get_pmic_model(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
I would prefer if this printed the human readable name of the PMIC
rather than a number that I can look up in the source code...
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_pmic_model());
> +}
> +
> +static ssize_t
> +qcom_get_pmic_die_revision(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + socinfo_get_pmic_die_revision());
> +}
> +
> +static ssize_t
> +qcom_get_image_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + char *string_address;
> +
> + string_address = socinfo_get_image_version_base_address(dev);
Make this call once during initialization and don't expose the version
attributes if you can't find the item.
> + if (IS_ERR(string_address)) {
> + pr_err("Failed to get image version base address");
> + return snprintf(buf, SMEM_IMAGE_VERSION_NAME_SIZE, "Unknown");
> + }
> + string_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + return snprintf(buf, SMEM_IMAGE_VERSION_NAME_SIZE, "%-.75s\n",
> + string_address);
> +}
> +
> +static ssize_t
> +qcom_set_image_version(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + char *store_address;
> +
> + if (current_image != SMEM_IMAGE_VERSION_PARTITION_APPS)
> + return count;
If you just make this 0644 for apps and 0444 then this won't happen, but
in cases like this you shouldn't just lie to user space about the
success.
> + store_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(store_address)) {
> + pr_err("Failed to get image version base address");
> + return count;
Dito
> + }
> + store_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + snprintf(store_address, SMEM_IMAGE_VERSION_NAME_SIZE, "%-.75s", buf);
I don't see the point in using a string formatter here, or why to limit
the output to 75 chars by the format string - and the string is limited
to 74 chars and then a \0.
Just replace it with:
strlcpy(store_address, buf, SMEM_IMAGE_VERSION_NAME_SIZE);
> + return count;
> +}
> +
> +static ssize_t
> +qcom_get_image_variant(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + char *string_address;
> +
> + string_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(string_address)) {
> + pr_err("Failed to get image version base address");
> + return snprintf(buf, SMEM_IMAGE_VERSION_VARIANT_SIZE,
> + "Unknown");
> + }
> + string_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + string_address += SMEM_IMAGE_VERSION_VARIANT_OFFSET;
> + return snprintf(buf, SMEM_IMAGE_VERSION_VARIANT_SIZE, "%-.20s\n",
> + string_address);
The output of this is the sysfs buffer, so PAGE_SIZE is the size you're
looking for. Is this string not terminated or why the limiting format
string?
And use scnprintf()
> +}
> +
> +static ssize_t
> +qcom_set_image_variant(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + char *store_address;
> +
> + if (current_image != SMEM_IMAGE_VERSION_PARTITION_APPS)
> + return count;
> + store_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(store_address)) {
> + pr_err("Failed to get image version base address");
> + return count;
> + }
> + store_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + store_address += SMEM_IMAGE_VERSION_VARIANT_OFFSET;
> + snprintf(store_address, SMEM_IMAGE_VERSION_VARIANT_SIZE, "%-.20s", buf);
> + return count;
> +}
> +
> +static ssize_t
> +qcom_get_image_crm_version(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + char *string_address;
> +
> + string_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(string_address)) {
> + pr_err("Failed to get image version base address");
> + return snprintf(buf, SMEM_IMAGE_VERSION_OEM_SIZE, "Unknown");
> + }
> + string_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + string_address += SMEM_IMAGE_VERSION_OEM_OFFSET;
> + return snprintf(buf, SMEM_IMAGE_VERSION_OEM_SIZE, "%-.32s\n",
> + string_address);
> +}
> +
> +static ssize_t
> +qcom_set_image_crm_version(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + char *store_address;
> +
> + if (current_image != SMEM_IMAGE_VERSION_PARTITION_APPS)
> + return count;
> + store_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(store_address)) {
> + pr_err("Failed to get image version base address");
> + return count;
> + }
> + store_address += current_image * SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + store_address += SMEM_IMAGE_VERSION_OEM_OFFSET;
> + snprintf(store_address, SMEM_IMAGE_VERSION_OEM_SIZE, "%-.32s", buf);
> + return count;
> +}
> +
> +static ssize_t
> +qcom_get_image_number(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return snprintf(buf, PAGE_SIZE, "%d\n",
> + current_image);
This is not a property of your soc...
> +}
> +
> +static ssize_t
> +qcom_select_image(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int ret, digit;
> +
> + ret = kstrtoint(buf, 10, &digit);
> + if (ret)
> + return ret;
> + if (digit >= 0 && digit < SMEM_IMAGE_VERSION_BLOCKS_COUNT)
> + current_image = digit;
> + else
> + current_image = 0;
> + return count;
...it's part of your version paging mechanism, which is not ok to put in
sysfs.
Create individual attribute files for each version entry, make the ones
representing apps read/write and the others read only.
> +}
> +
> +static ssize_t
> +qcom_get_images(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
Isn't this just a combined version of the above versions? sysfs
attributes should contain one entry each, no tables.
> + int pos = 0;
> + int image;
> + char *image_address;
> +
> + image_address = socinfo_get_image_version_base_address(dev);
> + if (IS_ERR(image_address))
> + return snprintf(buf, PAGE_SIZE, "Unavailable\n");
> +
> + *buf = '\0';
> + for (image = 0; image < SMEM_IMAGE_VERSION_BLOCKS_COUNT; image++) {
> + if (*image_address == '\0') {
> + image_address += SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + continue;
> + }
> +
> + pos += snprintf(buf + pos, PAGE_SIZE - pos, "%d:\n",
> + image);
> + pos += snprintf(buf + pos, PAGE_SIZE - pos,
> + "\tCRM:\t\t%-.75s\n", image_address);
> + pos += snprintf(buf + pos, PAGE_SIZE - pos,
> + "\tVariant:\t%-.20s\n", image_address +
> + SMEM_IMAGE_VERSION_VARIANT_OFFSET);
> + pos += snprintf(buf + pos, PAGE_SIZE - pos,
> + "\tVersion:\t%-.32s\n\n",
> + image_address + SMEM_IMAGE_VERSION_OEM_OFFSET);
> +
> + image_address += SMEM_IMAGE_VERSION_SINGLE_BLOCK_SIZE;
> + }
> +
> + return pos;
> +}
> +
> +static struct device_attribute qcom_soc_attr_raw_version =
> + __ATTR(raw_version, S_IRUGO, qcom_get_raw_version, NULL);
As checkpatch tell you, replace S_IRUGO with 0444
> +
> +static struct device_attribute qcom_soc_attr_vendor =
> + __ATTR(vendor, S_IRUGO, qcom_get_vendor, NULL);
> +
> +static struct device_attribute qcom_soc_attr_build_id =
> + __ATTR(build_id, S_IRUGO, qcom_get_build_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_hw_platform =
> + __ATTR(hw_platform, S_IRUGO, qcom_get_hw_platform, NULL);
> +
> +
> +static struct device_attribute qcom_soc_attr_platform_version =
> + __ATTR(platform_version, S_IRUGO,
> + qcom_get_platform_version, NULL);
> +
> +static struct device_attribute qcom_soc_attr_accessory_chip =
> + __ATTR(accessory_chip, S_IRUGO,
> + qcom_get_accessory_chip, NULL);
> +
> +static struct device_attribute qcom_soc_attr_platform_subtype =
> + __ATTR(platform_subtype, S_IRUGO,
> + qcom_get_platform_subtype, NULL);
> +
> +static struct device_attribute qcom_soc_attr_platform_subtype_id =
> + __ATTR(platform_subtype_id, S_IRUGO,
> + qcom_get_platform_subtype_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_foundry_id =
> + __ATTR(foundry_id, S_IRUGO,
> + qcom_get_foundry_id, NULL);
> +
> +static struct device_attribute qcom_soc_attr_serial_number =
> + __ATTR(serial_number, S_IRUGO,
> + qcom_get_serial_number, NULL);
> +
> +static struct device_attribute qcom_soc_attr_chip_family =
> + __ATTR(chip_family, S_IRUGO,
> + qcom_get_chip_family, NULL);
> +
> +static struct device_attribute qcom_soc_attr_raw_device_family =
> + __ATTR(raw_device_family, S_IRUGO,
> + qcom_get_raw_device_family, NULL);
> +
> +static struct device_attribute qcom_soc_attr_raw_device_number =
> + __ATTR(raw_device_number, S_IRUGO,
> + qcom_get_raw_device_number, NULL);
> +
> +static struct device_attribute qcom_soc_attr_pmic_model =
> + __ATTR(pmic_model, S_IRUGO,
> + qcom_get_pmic_model, NULL);
> +
> +static struct device_attribute qcom_soc_attr_pmic_die_revision =
> + __ATTR(pmic_die_revision, S_IRUGO,
> + qcom_get_pmic_die_revision, NULL);
> +
> +static struct device_attribute image_version =
> + __ATTR(image_version, S_IRUGO | S_IWUSR,
> + qcom_get_image_version, qcom_set_image_version);
> +
> +static struct device_attribute image_variant =
> + __ATTR(image_variant, S_IRUGO | S_IWUSR,
> + qcom_get_image_variant, qcom_set_image_variant);
> +
> +static struct device_attribute image_crm_version =
> + __ATTR(image_crm_version, S_IRUGO | S_IWUSR,
> + qcom_get_image_crm_version, qcom_set_image_crm_version);
> +
> +static struct device_attribute select_image =
> + __ATTR(select_image, S_IRUGO | S_IWUSR,
> + qcom_get_image_number, qcom_select_image);
> +
> +static struct device_attribute images =
> + __ATTR(images, S_IRUGO, qcom_get_images, NULL);
> +
> +
> +static void socinfo_populate_sysfs_files(struct device *qcom_soc_device)
> +{
> + device_create_file(qcom_soc_device, &qcom_soc_attr_vendor);
If you're keeping vendor it should be added to the generic
soc_device_attribute struct.
> + device_create_file(qcom_soc_device, &image_version);
> + device_create_file(qcom_soc_device, &image_variant);
> + device_create_file(qcom_soc_device, &image_crm_version);
> + device_create_file(qcom_soc_device, &select_image);
> + device_create_file(qcom_soc_device, &images);
> +
> + switch (socinfo_format) {
> + case SOCINFO_VERSION(0, 12):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_chip_family);
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_device_family);
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_device_number);
> + case SOCINFO_VERSION(0, 11):
> + case SOCINFO_VERSION(0, 10):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_serial_number);
> + case SOCINFO_VERSION(0, 9):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_foundry_id);
> + case SOCINFO_VERSION(0, 8):
> + case SOCINFO_VERSION(0, 7):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_pmic_model);
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_pmic_die_revision);
> + case SOCINFO_VERSION(0, 6):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_platform_subtype);
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_platform_subtype_id);
> + case SOCINFO_VERSION(0, 5):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_accessory_chip);
> + case SOCINFO_VERSION(0, 4):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_platform_version);
> + case SOCINFO_VERSION(0, 3):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_hw_platform);
> + case SOCINFO_VERSION(0, 2):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_raw_version);
> + case SOCINFO_VERSION(0, 1):
> + device_create_file(qcom_soc_device,
> + &qcom_soc_attr_build_id);
> + break;
> + default:
> + pr_err("Unknown socinfo format: v%u.%u\n",
> + SOCINFO_VERSION_MAJOR(socinfo_format),
> + SOCINFO_VERSION_MINOR(socinfo_format));
> + break;
> + }
> +}
> +
> +static void socinfo_populate(struct soc_device_attribute *soc_dev_attr)
> +{
> + u32 soc_version = socinfo_get_version();
> +
> + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", socinfo_get_id());
I believe soc_id is supposed to be a human readable name; e.g. "MSM8996"
not "246".
> + soc_dev_attr->family = "Snapdragon";
> + soc_dev_attr->machine = socinfo_get_id_string();
I think you're supposed to read the /model string from DT and put in
"machine".
> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u.%u",
> + SOCINFO_VERSION_MAJOR(soc_version),
> + SOCINFO_VERSION_MINOR(soc_version));
"revision" is supposed to state the revision of the SoC, not of the
socinfo data.
Also, skip the indentation of the assignments in this section (it's not
consistent anyways).
> + return;
No need to "return" here.
> +
> +}
> +
> +static int socinfo_init_sysfs(void)
> +{
> + struct device *qcom_soc_device;
> + struct soc_device *soc_dev;
> + struct soc_device_attribute *soc_dev_attr;
> +
> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
> + if (!soc_dev_attr) {
> + pr_err("Soc Device alloc failed!\n");
No need to print error message on kzalloc failures.
> + return -ENOMEM;
> + }
> +
> + socinfo_populate(soc_dev_attr);
Just inline socinfo_populate() here.
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + kfree(soc_dev_attr);
> + pr_err("Soc device register failed\n");
I believe soc_device_register() will print something useful in the
various error paths, so you shouldn't need to add another print here.
> + return PTR_ERR(soc_dev);
> + }
> +
> + qcom_soc_device = soc_device_to_device(soc_dev);
> + socinfo_populate_sysfs_files(qcom_soc_device);
> + return 0;
> +}
> +#else
> +static int socinfo_init_sysfs(void)
> +{
> + return 0;
> +}
> +#endif
> +
> +static u32 socinfo_get_id(void)
> +{
> + return (socinfo) ? socinfo->v0_1.id : 0;
> +}
> +
> +void *setup_dummy_socinfo(void)
> +{
> + dummy_socinfo.id = MSM_UNKNOWN_ID;
> + strlcpy(dummy_socinfo.build_id, "Unknown build",
> + sizeof(dummy_socinfo.build_id));
> + return (void *) &dummy_socinfo;
> +}
> +
> +static void socinfo_print(void)
> +{
Does this function serve a purpose?
We already have an overwhelming amount of information (noise) being
thrown at us during boot.
> + u32 f_maj = SOCINFO_VERSION_MAJOR(socinfo_format);
> + u32 f_min = SOCINFO_VERSION_MINOR(socinfo_format);
> + u32 v_maj = SOCINFO_VERSION_MAJOR(socinfo->v0_1.version);
> + u32 v_min = SOCINFO_VERSION_MINOR(socinfo->v0_1.version);
> +
> + switch (socinfo_format) {
> + case SOCINFO_VERSION(0, 1):
> + pr_info("v%u.%u, id=%u, ver=%u.%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min);
> + break;
> + case SOCINFO_VERSION(0, 2):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version);
> + break;
> + case SOCINFO_VERSION(0, 3):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u\n",
> + f_maj, f_min, socinfo->v0_1.id,
> + v_maj, v_min, socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform);
> + break;
> + case SOCINFO_VERSION(0, 4):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version);
> + break;
> + case SOCINFO_VERSION(0, 5):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip);
> + break;
> + case SOCINFO_VERSION(0, 6):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u, hw_plat_subtype=%u\n",
> + f_maj, f_min, socinfo->v0_1.id,
> + v_maj, v_min, socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype);
> + break;
> + case SOCINFO_VERSION(0, 7):
> + case SOCINFO_VERSION(0, 8):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u, hw_plat_subtype=%u, pmic_model=%u, pmic_die_revision=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype,
> + socinfo->v0_7.pmic_model,
> + socinfo->v0_7.pmic_die_revision);
> + break;
> + case SOCINFO_VERSION(0, 9):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u, hw_plat_subtype=%u, pmic_model=%u, pmic_die_revision=%u foundry_id=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype,
> + socinfo->v0_7.pmic_model,
> + socinfo->v0_7.pmic_die_revision,
> + socinfo->v0_9.foundry_id);
> + break;
> + case SOCINFO_VERSION(0, 10):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u, hw_plat_subtype=%u, pmic_model=%u, pmic_die_revision=%u, foundry_id=%u, serial_number=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype,
> + socinfo->v0_7.pmic_model,
> + socinfo->v0_7.pmic_die_revision,
> + socinfo->v0_9.foundry_id,
> + socinfo->v0_10.serial_number);
> + break;
> + case SOCINFO_VERSION(0, 11):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u, accessory_chip=%u, hw_plat_subtype=%u, pmic_model=%u, pmic_die_revision=%u, foundry_id=%u, serial_number=%u num_pmics=%u\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype,
> + socinfo->v0_7.pmic_model,
> + socinfo->v0_7.pmic_die_revision,
> + socinfo->v0_9.foundry_id,
> + socinfo->v0_10.serial_number,
> + socinfo->v0_11.num_pmics);
> + break;
> + case SOCINFO_VERSION(0, 12):
> + pr_info("v%u.%u, id=%u, ver=%u.%u, raw_ver=%u, hw_plat=%u, hw_plat_ver=%u accessory_chip=%u, hw_plat_subtype=%u, pmic_model=%u, pmic_die_revision=%u, foundry_id=%u, serial_number=%u, num_pmics=%u, chip_family=0x%x, raw_device_family=0x%x, raw_device_number=0x%x\n",
> + f_maj, f_min, socinfo->v0_1.id, v_maj, v_min,
> + socinfo->v0_2.raw_version,
> + socinfo->v0_3.hw_platform,
> + socinfo->v0_4.platform_version,
> + socinfo->v0_5.accessory_chip,
> + socinfo->v0_6.hw_platform_subtype,
> + socinfo->v0_7.pmic_model,
> + socinfo->v0_7.pmic_die_revision,
> + socinfo->v0_9.foundry_id,
> + socinfo->v0_10.serial_number,
> + socinfo->v0_11.num_pmics,
> + socinfo->v0_12.chip_family,
> + socinfo->v0_12.raw_device_family,
> + socinfo->v0_12.raw_device_number);
> + break;
> +
> + default:
> + pr_err("Unknown format found: v%u.%u\n", f_maj, f_min);
> + break;
> + }
> +}
> +
> +static void socinfo_select_format(void)
> +{
> + u32 f_maj = SOCINFO_VERSION_MAJOR(socinfo->v0_1.format);
> + u32 f_min = SOCINFO_VERSION_MINOR(socinfo->v0_1.format);
> +
> + if (f_maj != 0) {
> + pr_err("Unsupported format v%u.%u. Falling back to dummy values.\n",
> + f_maj, f_min);
> + socinfo = setup_dummy_socinfo();
> + }
> +
> + if (socinfo->v0_1.format > MAX_SOCINFO_FORMAT) {
> + pr_warn("Unsupported format v%u.%u. Falling back to v%u.%u.\n",
> + f_maj, f_min, SOCINFO_VERSION_MAJOR(MAX_SOCINFO_FORMAT),
> + SOCINFO_VERSION_MINOR(MAX_SOCINFO_FORMAT));
> + socinfo_format = MAX_SOCINFO_FORMAT;
> + } else {
> + socinfo_format = socinfo->v0_1.format;
> + }
> +}
> +
> +int qcom_socinfo_init(void *info, size_t size)
> +{
> + socinfo = info;
> +
> + socinfo_select_format();
> +
> + WARN(!socinfo_get_id(), "Unknown SOC ID!\n");
No need to WARN() about this.
I bet this is not really ever happening outside early development at
Qualcomm, so I would go with a print and just skip the entire soc_device
initialization when this happens.
> +
> + WARN(socinfo_get_id() >= ARRAY_SIZE(cpu_of_id),
> + "New IDs added! ID => CPU mapping needs an update.\n");
> +
> + socinfo_print();
> +
> + socinfo_init_sysfs();
> +
> + /* Feed the soc specific unique data into entropy pool */
> + add_device_randomness(info, size);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(qcom_socinfo_init);
> +
> diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h
> index 785e196..62e9476 100644
> --- a/include/linux/soc/qcom/smem.h
> +++ b/include/linux/soc/qcom/smem.h
> @@ -7,5 +7,6 @@
> void *qcom_smem_get(unsigned host, unsigned item, size_t *size);
>
> int qcom_smem_get_free_space(unsigned host);
> -
> +int qcom_socinfo_init(void *info, size_t size);
soc/qcom/smem.h is the public API for smem, this function is not part of
that API so I don't like having it defined here.
Normally we would create an internal include file in drivers/soc/qcom,
but as it's only a single function I would suggest just declaring it
external inside smem.c
> +void *setup_dummy_socinfo(void);
And drop this.
> #endif
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
