On Monday, September 5, 2016 2:29:24 PM CEST Linus Walleij wrote: > +Chip Select Physical address base > +CS0 GPIO134 0x1a800000-0x1b000000 (8MB) > +CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) > +CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) > +CS3 GPIO133 0x1d000000-0x25000000 (128 MB) > +CS4 GPIO132 0x1c800000-0x1d000000 (8MB) > +CS5 GPIO131 0x1c000000-0x1c800000 (8MB) > + > +- ranges: should be set to: > + ranges = <0 0x0 0x1a800000 0x00800000>, > + <1 0x0 0x1b000000 0x00800000>, > + <2 0x0 0x1b800000 0x00800000>, > + <3 0x0 0x1d000000 0x00800000>, > + <4 0x0 0x1c800000 0x00800000>, > + <5 0x0 0x1c000000 0x00800000>; > The two lists don't seem to match here: why is the CS3 area only listed with an 8MB mapping here when the documentation says it's 128 MB? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
