After Broadcom switched from MIPS to ARM for their home routers we need to have NVRAM driver in some common place (not arch/mips/). We were thinking about putting it in bus directory, however there are two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this won't fit there neither. This is why I would like to move this driver to the drivers/firmware/ Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- Hey, this is another try for the NVRAM driver. At first I tried moving it to the drivers/misc/, but then decided drivers/soc/ will be better. Then after discussion with Paul we decided to try drivers/firmware/ and so I do. Meanwhile I've sent few patches cleaning nvram.c: following kernel coding style and using helpers like readl. I would like to get few Reviewed-by for this patch. If I get that, then I'll re-send this patch to Ralf without the RFC. If you want to review nvram.c code, please make sure to check version in ralf/upstream-sfr.git repository as it contains many cleanups: git://git.linux-mips.org/pub/scm/ralf/upstream-sfr.git http://git.linux-mips.org/cgit/ralf/upstream-sfr.git/log/ Mentioned patches (more cleanups): http://patchwork.linux-mips.org/project/linux-mips/list/?submitter=478 Finally: why drivers/firmware/? Please see Paul's e-mail: <alpine.DEB.2.02.1411271926560.1406@xxxxxxxxxxxxxxxxxx> http://www.linux-mips.org/archives/linux-mips/2014-11/msg00678.html Unfortunately there is no mailing list for drivers/firmware/, so I've picked ppl with 5+ commits to this directory. Hope this is OK. --- arch/mips/Kconfig | 1 + arch/mips/bcm47xx/Makefile | 2 +- drivers/firmware/Kconfig | 1 + drivers/firmware/Makefile | 1 + drivers/firmware/broadcom/Kconfig | 11 +++++++++++ drivers/firmware/broadcom/Makefile | 1 + .../nvram.c => drivers/firmware/broadcom/bcm47xx_nvram.c | 2 ++ include/linux/bcm47xx_nvram.h | 2 +- 8 files changed, 19 insertions(+), 2 deletions(-) create mode 100644 drivers/firmware/broadcom/Kconfig create mode 100644 drivers/firmware/broadcom/Makefile rename arch/mips/bcm47xx/nvram.c => drivers/firmware/broadcom/bcm47xx_nvram.c (99%) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d093889..ed9da3b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -174,6 +174,7 @@ config BCM47XX select USE_GENERIC_EARLY_PRINTK_8250 select GPIOLIB select LEDS_GPIO_REGISTER + select BCM47XX_NVRAM help Support for BCM47XX based boards diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile index d58c51b..66bea4e 100644 --- a/arch/mips/bcm47xx/Makefile +++ b/arch/mips/bcm47xx/Makefile @@ -3,5 +3,5 @@ # under Linux. # -obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +obj-y += irq.o prom.o serial.o setup.o time.o sprom.o obj-y += board.o buttons.o leds.o workarounds.o diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 4198388..ffbc9e4 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -132,6 +132,7 @@ config ISCSI_IBFT detect iSCSI boot parameters dynamically during system boot, say Y. Otherwise, say N. +source "drivers/firmware/broadcom/Kconfig" source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 5373dc5..e251f2b 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o +obj-y += broadcom/ obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_UEFI_CPER) += efi/ diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig new file mode 100644 index 0000000..6bed119 --- /dev/null +++ b/drivers/firmware/broadcom/Kconfig @@ -0,0 +1,11 @@ +config BCM47XX_NVRAM + bool "Broadcom NVRAM driver" + depends on BCM47XX || ARCH_BCM_5301X + help + Broadcom home routers contain flash partition called "nvram" with all + important hardware configuration as well as some minor user setup. + NVRAM partition contains a text-like data representing name=value + pairs. + This driver provides an easy way to get value of requested parameter. + It simply reads content of NVRAM and parses it. It doesn't control any + hardware part itself. diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile new file mode 100644 index 0000000..d0e6835 --- /dev/null +++ b/drivers/firmware/broadcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o diff --git a/arch/mips/bcm47xx/nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c similarity index 99% rename from arch/mips/bcm47xx/nvram.c rename to drivers/firmware/broadcom/bcm47xx_nvram.c index 2975187..fe8c8c9 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/drivers/firmware/broadcom/bcm47xx_nvram.c @@ -228,3 +228,5 @@ int bcm47xx_nvram_gpio_pin(const char *name) return -ENOENT; } EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin); + +MODULE_LICENSE("GPLv2"); diff --git a/include/linux/bcm47xx_nvram.h b/include/linux/bcm47xx_nvram.h index b12b07e..0e52a92 100644 --- a/include/linux/bcm47xx_nvram.h +++ b/include/linux/bcm47xx_nvram.h @@ -11,7 +11,7 @@ #include <linux/types.h> #include <linux/kernel.h> -#ifdef CONFIG_BCM47XX +#ifdef CONFIG_BCM47XX_NVRAM int bcm47xx_nvram_init_from_mem(u32 base, u32 lim); int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len); int bcm47xx_nvram_gpio_pin(const char *name); -- 1.8.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
