Re: [PATCH v3 1/2] DRM: ARC: add HDMI 2.0 TX encoder support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 21, 2020 at 05:55:38PM +0200, Neil Armstrong wrote:
> On 15/04/2020 19:33, Daniel Vetter wrote:
> > On Wed, Apr 15, 2020 at 02:29:28AM +0300, Eugeniy Paltsev wrote:
> >> The Synopsys ARC SoCs (like HSDK4xD) include on-chip DesignWare HDMI
> >> encoders. Support them with a platform driver to provide platform glue
> >> data to the dw-hdmi driver.
> >>
> >> Acked-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> >> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> >> ---
> >>  MAINTAINERS                       |   6 ++
> >>  drivers/gpu/drm/Makefile          |   2 +-
> >>  drivers/gpu/drm/arc/Kconfig       |   7 ++
> >>  drivers/gpu/drm/arc/Makefile      |   1 +
> >>  drivers/gpu/drm/arc/arc-dw-hdmi.c | 116 ++++++++++++++++++++++++++++++
> >>  5 files changed, 131 insertions(+), 1 deletion(-)
> >>  create mode 100644 drivers/gpu/drm/arc/arc-dw-hdmi.c
> >>
> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> index a6fbdf354d34..2aaed1190370 100644
> >> --- a/MAINTAINERS
> >> +++ b/MAINTAINERS
> >> @@ -1258,6 +1258,12 @@ S:	Supported
> >>  F:	drivers/gpu/drm/arc/
> >>  F:	Documentation/devicetree/bindings/display/snps,arcpgu.txt
> >>  
> >> +ARC DW HDMI DRIVER
> >> +M:	Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> >> +S:	Supported
> >> +F:	drivers/gpu/drm/arc/arc-dw-hdmi.c
> >> +F:	Documentation/devicetree/bindings/display/bridge/snps,arc-dw-hdmi.yaml
> >> +
> >>  ARCNET NETWORK LAYER
> >>  M:	Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
> >>  L:	netdev@xxxxxxxxxxxxxxx
> >> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> >> index 6493088a0fdd..5b0bcf7f45cd 100644
> >> --- a/drivers/gpu/drm/Makefile
> >> +++ b/drivers/gpu/drm/Makefile
> >> @@ -109,7 +109,7 @@ obj-y			+= panel/
> >>  obj-y			+= bridge/
> >>  obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
> >>  obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
> >> -obj-$(CONFIG_DRM_ARCPGU)+= arc/
> >> +obj-y			+= arc/
> >>  obj-y			+= hisilicon/
> >>  obj-$(CONFIG_DRM_ZTE)	+= zte/
> >>  obj-$(CONFIG_DRM_MXSFB)	+= mxsfb/
> >> diff --git a/drivers/gpu/drm/arc/Kconfig b/drivers/gpu/drm/arc/Kconfig
> >> index e8f3d63e0b91..baec9d2a4fba 100644
> >> --- a/drivers/gpu/drm/arc/Kconfig
> >> +++ b/drivers/gpu/drm/arc/Kconfig
> >> @@ -8,3 +8,10 @@ config DRM_ARCPGU
> >>  	  Choose this option if you have an ARC PGU controller.
> >>  
> >>  	  If M is selected the module will be called arcpgu.
> >> +
> >> +config DRM_ARC_DW_HDMI
> >> +	tristate "ARC DW HDMI"
> >> +	depends on DRM && OF
> >> +	select DRM_DW_HDMI
> >> +	help
> >> +	  Synopsys DW HDMI driver for various ARC development boards
> >> diff --git a/drivers/gpu/drm/arc/Makefile b/drivers/gpu/drm/arc/Makefile
> >> index c7028b7427b3..7a156d8c2c3c 100644
> >> --- a/drivers/gpu/drm/arc/Makefile
> >> +++ b/drivers/gpu/drm/arc/Makefile
> >> @@ -1,3 +1,4 @@
> >>  # SPDX-License-Identifier: GPL-2.0-only
> >>  arcpgu-y := arcpgu_crtc.o arcpgu_hdmi.o arcpgu_sim.o arcpgu_drv.o
> >>  obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
> >> +obj-$(CONFIG_DRM_ARC_DW_HDMI) += arc-dw-hdmi.o
> >> diff --git a/drivers/gpu/drm/arc/arc-dw-hdmi.c b/drivers/gpu/drm/arc/arc-dw-hdmi.c
> >> new file mode 100644
> >> index 000000000000..46a6ee09b302
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/arc/arc-dw-hdmi.c
> >> @@ -0,0 +1,116 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +//
> >> +// Synopsys DW HDMI driver for various ARC development boards
> >> +//
> >> +// Copyright (C) 2020 Synopsys
> >> +// Author: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> >> +
> >> +#include <linux/component.h>
> >> +#include <linux/module.h>
> >> +#include <linux/platform_device.h>
> >> +#include <drm/bridge/dw_hdmi.h>
> >> +#include <drm/drm_crtc_helper.h>
> >> +#include <drm/drm_edid.h>
> >> +#include <drm/drm_encoder_slave.h>
> >> +#include <drm/drm_of.h>
> >> +
> >> +static const struct dw_hdmi_mpll_config snps_hdmi_mpll_cfg[] = {
> >> +	{
> >> +		27000000, {
> >> +			{ 0x00B3, 0x0000 },
> >> +			{ 0x00B3, 0x0000 },
> >> +			{ 0x00B3, 0x0000 }
> >> +		},
> >> +	}, {
> >> +		74250000, {
> >> +			{ 0x0072, 0x0001},
> >> +			{ 0x0072, 0x0001},
> >> +			{ 0x0072, 0x0001}
> >> +		},
> >> +	}, {
> >> +		148500000, {
> >> +			{ 0x0051, 0x0002},
> >> +			{ 0x0051, 0x0002},
> >> +			{ 0x0051, 0x0002}
> >> +		},
> >> +	}, {
> >> +		~0UL, {
> >> +			{ 0x00B3, 0x0000 },
> >> +			{ 0x00B3, 0x0000 },
> >> +			{ 0x00B3, 0x0000 },
> >> +		},
> >> +	}
> >> +};
> >> +
> >> +static const struct dw_hdmi_curr_ctrl snps_hdmi_cur_ctr[] = {
> >> +	/* pixelclk    bpp8    bpp10   bpp12 */
> >> +	{ 27000000,  { 0x0000, 0x0000, 0x0000 }, },
> >> +	{ 74250000,  { 0x0008, 0x0008, 0x0008 }, },
> >> +	{ 148500000, { 0x001b, 0x001b, 0x001b }, },
> >> +	{ ~0UL,      { 0x0000, 0x0000, 0x0000 }, }
> >> +};
> >> +
> >> +
> >> +static const struct dw_hdmi_phy_config snps_hdmi_phy_config[] = {
> >> +	/* pixelclk   symbol  term    vlev */
> >> +	{ 27000000,   0x8009, 0x0004, 0x0232},
> >> +	{ 74250000,   0x8009, 0x0004, 0x0232},
> >> +	{ 148500000,  0x8009, 0x0004, 0x0232},
> >> +	{ ~0UL,       0x8009, 0x0004, 0x0232}
> >> +};
> >> +
> >> +static struct dw_hdmi_plat_data snps_dw_hdmi_drv_data = {
> >> +	.mpll_cfg   = snps_hdmi_mpll_cfg,
> >> +	.cur_ctr    = snps_hdmi_cur_ctr,
> >> +	.phy_config = snps_hdmi_phy_config,
> >> +};
> >> +
> >> +static const struct of_device_id snps_dw_hdmi_dt_ids[] = {
> >> +	{ .compatible = "snps,arc-dw-hdmi-hsdk", .data = &snps_dw_hdmi_drv_data },
> >> +	{ /* sentinel */ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, snps_dw_hdmi_dt_ids);
> >> +
> >> +static int snps_dw_hdmi_probe(struct platform_device *pdev)
> >> +{
> >> +	const struct dw_hdmi_plat_data *plat_data;
> >> +	const struct of_device_id *match;
> >> +	struct dw_hdmi *hdmi;
> >> +
> >> +	if (!pdev->dev.of_node)
> >> +		return -ENODEV;
> >> +
> >> +	match = of_match_node(snps_dw_hdmi_dt_ids, pdev->dev.of_node);
> >> +	plat_data = match->data;
> >> +
> >> +	hdmi = dw_hdmi_probe(pdev, plat_data);
> > 
> > So this is kinda not how bridge drivers are supposed to be done nowadays,
> > direct calling into the driver was the old way, and dw-hdmi still works
> > like that. Modern way is roughly
> > - bridge drivers bind automatically to any bridge they support
> > - bridge drivers publish a bridge with drm_bridge_add()
> > - the driver using the bridge fishes out with dt magic using
> >   of_drm_find_bridge() or another of the related of_ functions
> 
> dw-hdmi is an IP, with some platform specific code and arrays to make it work
> on very different systems, thus we can't use this scheme everywhere....
> 
> Some platforms (like r-car) uses the "right" model because the IP is integrated
> as-is with the default PHY and as an independent IP on the system.
> 
> It's definitely not the case on Rockchip/Amlogic/Allwinner systems,
> and even worse on Amlogic system having a glue on top of the IP, and a
> custom PHY instead of the Synopsys PHY.
> 
> Thus it would be great this would be the case on a Synopsys SoC... but like
> other platforms they have platform specific parameters.
> 
> All this has been discussed and reviewed a few years ago, I would
> personally prefer "fishing out a bridge using dt magic" instead having
> 1k glue code around the IP.

I'm not opposed to the per-instance glue code, that seems required. I'm
kinda questioning where it is.

Current design is that the glue code is in the drm_device driver side of
things, with the drm_bridge somewhat awkward in-between. That doesn't seem
very clean.

I think more suitable for drm_bridge would be to push all the glue behind
the drm_bridge (maybe into separate files in a drm/bridge/dw-hdmi/
directory), and the drm_device driver side simply grabs a drm_bridge and
that's it. Then the drm_bridge abstraction lines up with the code
organization again. Atm it's a bit a confusing state of things.

Plan B would be to give up dw-hdmi being a drm_bridge, and rework dw-hdmi
to be some kind of helper library to build a driver for a specific dw-hdmi
instance. I think that would also be a clean design.

But right now we kinda have a bit of both, so not really abstracted, but
also not really a clean helper without midlayer either, and that doesn't
look great.
-Daniel

> 
> Neil
> 
> > 
> > I know a bit late, just spotted this because you brought your series here
> > up in my arc cleanup series, but can you pls look into adjusting
> > accordingly?
> > 
> > I shouldn't take more than moving this binding here into the dw-hdmi
> > driver, and switching arc itself over to the of_drm_find_bridge() call.
> > That way we could slowly work to transform old bridge drivers like dw-hdmi
> > to the new way, instead of adding more cases that will never get
> > converted.
> > 
> > Other upside is that arc stays a neat&tiny driver :-)
> > 
> > Thanks, Daniel
> > 
> >> +	if (IS_ERR(hdmi))
> >> +		return PTR_ERR(hdmi);
> >> +
> >> +	platform_set_drvdata(pdev, hdmi);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int snps_dw_hdmi_remove(struct platform_device *pdev)
> >> +{
> >> +	struct dw_hdmi *hdmi = platform_get_drvdata(pdev);
> >> +
> >> +	dw_hdmi_remove(hdmi);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static struct platform_driver snps_dw_hdmi_platform_driver = {
> >> +	.probe  = snps_dw_hdmi_probe,
> >> +	.remove = snps_dw_hdmi_remove,
> >> +	.driver = {
> >> +		.name = KBUILD_MODNAME,
> >> +		.of_match_table = snps_dw_hdmi_dt_ids,
> >> +	},
> >> +};
> >> +module_platform_driver(snps_dw_hdmi_platform_driver);
> >> +
> >> +MODULE_LICENSE("GPL v2");
> >> +MODULE_DESCRIPTION("ARC specific DW-HDMI driver extension");
> >> +MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>");
> >> -- 
> >> 2.21.1
> >>
> > 
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-snps-arc



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux