[PATCH AUTOSEL 4.20 43/60] ARCv2: lib: memcpy: fix doing prefetchw outside of buffer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Eugeniy Paltsev <eugeniy.paltsev@xxxxxxxxxxxx>

[ Upstream commit f8a15f97664178f27dfbf86a38f780a532cb6df0 ]

ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.

Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.

We also cut off all PREFETCH instructions at they are quite useless
here:
 * we call PREFETCH right before LOAD instruction call.
 * we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
   in a main logical loop. so we call PREFETCH 4 times (or 2 times)
   for each L1 cache line (in case of 64B L1 cache Line which is
   default case). Obviously this is not optimal.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
Signed-off-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arc/lib/memcpy-archs.S | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
index d61044dd8b58..ea14b0bf3116 100644
--- a/arch/arc/lib/memcpy-archs.S
+++ b/arch/arc/lib/memcpy-archs.S
@@ -25,15 +25,11 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX)	prefetch    [RX, 56]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 64]
 # define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
 # define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
 # define ZOLSHFT		5
 # define ZOLAND			0x1F
 #else
-# define PREFETCH_READ(RX)	prefetch    [RX, 28]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 32]
 # define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
 # define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
 # define ZOLSHFT		4
@@ -41,8 +37,6 @@
 #endif
 
 ENTRY_CFI(memcpy)
-	prefetch [r1]		; Prefetch the read location
-	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
-	PREFETCH_READ (r1)
-	PREFETCH_WRITE (r3)
 	LOADX (r8, r1)
 	LOADX (r10, r1)
 	LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 24)
 	or	r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 16)
 	or	r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5
-- 
2.19.1


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-snps-arc



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux