From: Alexey Brodkin <alexey.brodkin@xxxxxxxxxxxx> 1. Remove "0x" prefix from unit-address of node names ----------------------->8------------------------ sed -i 's/@0x/@/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ 2. Make all hex addresses lowercase: ----------------------->8------------------------ sed -i 's/@\([0-9A-Za-z]*\)/@\L\1/g' arch/arc/boot/dts/*.dts* sed -i 's/0x\([0-9A-Za-z]*\)/0x\L\1/g' arch/arc/boot/dts/*.dts* ----------------------->8------------------------ Inspired by [1] and the like. [1] http://kisskb.ellerman.id.au/kisskb/buildresult/13612017/ Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> --- Changes v1 -> v2: * Convert all hex addresses to lower-case [Rob] arch/arc/boot/dts/abilis_tb100.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb100_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb101.dtsi | 58 ++++++++++++++++---------------- arch/arc/boot/dts/abilis_tb101_dvk.dts | 14 ++++---- arch/arc/boot/dts/abilis_tb10x.dtsi | 60 +++++++++++++++++----------------- arch/arc/boot/dts/axc001.dtsi | 6 ++-- arch/arc/boot/dts/axc003.dtsi | 16 ++++----- arch/arc/boot/dts/axc003_idu.dtsi | 16 ++++----- arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++------- arch/arc/boot/dts/hsdk.dts | 4 +-- arch/arc/boot/dts/vdk_axc003.dtsi | 4 +-- arch/arc/boot/dts/vdk_axc003_idu.dtsi | 4 +-- arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 18 +++++----- 13 files changed, 147 insertions(+), 147 deletions(-) diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi index 02410b211433..c0bcd97522bb 100644 --- a/arch/arc/boot/dts/abilis_tb100.dtsi +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -162,182 +162,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts index 3acf04db8030..c968e677db46 100644 --- a/arch/arc/boot/dts/abilis_tb100_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi index f9e7686044eb..6a1615f58f05 100644 --- a/arch/arc/boot/dts/abilis_tb101.dtsi +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -171,182 +171,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts index 37d88c5dd181..05143ce9c120 100644 --- a/arch/arc/boot/dts/abilis_tb101_dvk.dts +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi index 3121536b25a3..2fbf1bdfe6de 100644 --- a/arch/arc/boot/dts/abilis_tb10x.dtsi +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -54,7 +54,7 @@ #size-cells = <1>; device_type = "soc"; ranges = <0xfe000000 0xfe000000 0x02000000 - 0x000F0000 0x000F0000 0x00010000>; + 0x000f0000 0x000f0000 0x00010000>; compatible = "abilis,tb10x", "simple-bus"; pll0: oscillator { @@ -75,10 +75,10 @@ clock-output-names = "ahb_clk"; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { compatible = "abilis,tb10x-iomux"; #gpio-range-cells = <3>; - reg = <0xFF10601c 0x4>; + reg = <0xff10601c 0x4>; }; intc: interrupt-controller { @@ -88,7 +88,7 @@ }; tb10x_ictl: pic@fe002000 { compatible = "abilis,tb10x-ictl"; - reg = <0xFE002000 0x20>; + reg = <0xfe002000 0x20>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&intc>; @@ -96,27 +96,27 @@ 20 21 22 23 24 25 26 27 28 29 30 31>; }; - uart@FF100000 { + uart@ff100000 { compatible = "snps,dw-apb-uart"; - reg = <0xFF100000 0x100>; + reg = <0xff100000 0x100>; clock-frequency = <166666666>; interrupts = <25 8>; reg-shift = <2>; reg-io-width = <4>; interrupt-parent = <&tb10x_ictl>; }; - ethernet@FE100000 { + ethernet@fe100000 { compatible = "snps,dwmac-3.70a","snps,dwmac"; - reg = <0xFE100000 0x1058>; + reg = <0xfe100000 0x1058>; interrupt-parent = <&tb10x_ictl>; interrupts = <6 8>; interrupt-names = "macirq"; clocks = <&ahb_clk>; clock-names = "stmmaceth"; }; - dma@FE000000 { + dma@fe000000 { compatible = "snps,dma-spear1340"; - reg = <0xFE000000 0x400>; + reg = <0xfe000000 0x400>; interrupt-parent = <&tb10x_ictl>; interrupts = <14 8>; dma-channels = <6>; @@ -132,70 +132,70 @@ multi-block = <1 1 1 1 1 1>; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF120000 0x1000>; + reg = <0xff120000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF121000 0x1000>; + reg = <0xff121000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF122000 0x1000>; + reg = <0xff122000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF123000 0x1000>; + reg = <0xff123000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF124000 0x1000>; + reg = <0xff124000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - spi0: spi@0xFE010000 { + spi0: spi@fe010000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "abilis,tb100-spi"; num-cs = <1>; - reg = <0xFE010000 0x20>; + reg = <0xfe010000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <26 8>; clocks = <&ahb_clk>; }; - spi1: spi@0xFE011000 { + spi1: spi@fe011000 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "abilis,tb100-spi"; num-cs = <2>; - reg = <0xFE011000 0x20>; + reg = <0xfe011000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <10 8>; clocks = <&ahb_clk>; @@ -226,23 +226,23 @@ interrupts = <20 2>, <19 2>; interrupt-names = "cmd_irq", "event_irq"; }; - tb10x_mdsc0: tb10x-mdscr@FF300000 { + tb10x_mdsc0: tb10x-mdscr@ff300000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF300000 0x7000>; + reg = <0xff300000 0x7000>; tb100-mdscr-manage-tsin; }; - tb10x_mscr0: tb10x-mdscr@FF307000 { + tb10x_mscr0: tb10x-mdscr@ff307000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF307000 0x7000>; + reg = <0xff307000 0x7000>; }; tb10x_scr0: tb10x-mdscr@ff30e000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF30e000 0x4000>; + reg = <0xff30e000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_scr1: tb10x-mdscr@ff312000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF312000 0x4000>; + reg = <0xff312000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_wfb: tb10x-wfb@ff319000 { diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index fdc266504ada..37be3bf03ad6 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -41,7 +41,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -60,7 +60,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -88,7 +88,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index d75d65ddf8e3..effa37536d7a 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -55,7 +55,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -74,7 +74,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -102,19 +102,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -132,7 +132,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -153,7 +153,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi index a05bb737ea63..e401e59f6180 100644 --- a/arch/arc/boot/dts/axc003_idu.dtsi +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -62,7 +62,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -81,7 +81,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -109,19 +109,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -138,7 +138,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -159,7 +159,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index 37bafd44e36d..4ead6dc9af2f 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -72,7 +72,7 @@ }; }; - gmac: ethernet@0x18000 { + gmac: ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -88,13 +88,13 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - ohci@0x60000 { + ohci@60000 { compatible = "generic-ohci"; reg = < 0x60000 0x100 >; interrupts = < 8 >; @@ -118,7 +118,7 @@ * dw_mci_pltfm_prepare_command() is used in generic platform * code. */ - mmc@0x15000 { + mmc@15000 { compatible = "altr,socfpga-dw-mshc"; reg = < 0x15000 0x400 >; fifo-depth = < 16 >; @@ -129,7 +129,7 @@ bus-width = < 4 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <33333333>; @@ -139,7 +139,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <33333333>; @@ -150,7 +150,7 @@ }; /* UART muxed with USB data port (ttyS3) */ - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <33333333>; @@ -160,7 +160,7 @@ reg-io-width = <4>; }; - i2c@0x1d000 { + i2c@1d000 { compatible = "snps,designware-i2c"; reg = <0x1d000 0x100>; clock-frequency = <400000>; @@ -177,7 +177,7 @@ #sound-dai-cells = <0>; }; - i2c@0x1f000 { + i2c@1f000 { compatible = "snps,designware-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -218,13 +218,13 @@ }; }; - eeprom@0x54{ + eeprom@54{ compatible = "atmel,24c01"; reg = <0x54>; pagesize = <0x8>; }; - eeprom@0x57{ + eeprom@57{ compatible = "atmel,24c04"; reg = <0x57>; pagesize = <0x8>; diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts index 43f17b51ee89..6c23fa063ced 100644 --- a/arch/arc/boot/dts/hsdk.dts +++ b/arch/arc/boot/dts/hsdk.dts @@ -110,12 +110,12 @@ cgu_rst: reset-controller@8a0 { compatible = "snps,hsdk-reset"; #reset-cells = <1>; - reg = <0x8A0 0x4>, <0xFF0 0x4>; + reg = <0x8a0 0x4>, <0xff0 0x4>; }; core_clk: core-clk@0 { compatible = "snps,hsdk-core-pll-clock"; - reg = <0x00 0x10>, <0x14B8 0x4>; + reg = <0x00 0x10>, <0x14b8 0x4>; #clock-cells = <0>; clocks = <&input_clk>; diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi index 0fd6ba985b16..84e8766c8ca2 100644 --- a/arch/arc/boot/dts/vdk_axc003.dtsi +++ b/arch/arc/boot/dts/vdk_axc003.dtsi @@ -36,7 +36,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -49,7 +49,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi index 28956f9a9f3d..eb7e705e8a27 100644 --- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi +++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi @@ -44,7 +44,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -57,7 +57,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi index 48bb4b4cd234..925d5cc95dbb 100644 --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi @@ -36,7 +36,7 @@ }; }; - ethernet@0x18000 { + ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -49,13 +49,13 @@ clock-names = "stmmaceth"; }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <2403200>; @@ -65,7 +65,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <2403200>; @@ -75,7 +75,7 @@ reg-io-width = <4>; }; - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <2403200>; @@ -101,7 +101,7 @@ interrupt-names = "arc_ps2_irq"; }; - mmc@0x15000 { + mmc@15000 { compatible = "snps,dw-mshc"; reg = <0x15000 0x400>; fifo-depth = <1024>; @@ -117,11 +117,11 @@ * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * * This node is intentionally put outside of MB above becase - * it maps areas outside of MB's 0xEz-0xFz. + * it maps areas outside of MB's 0xez-0xfz. */ - uio_ev: uio@0xD0000000 { + uio_ev: uio@d0000000 { compatible = "generic-uio"; - reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; interrupt-parent = <&mb_intc>; interrupts = <23>; -- 2.16.2 _______________________________________________ linux-snps-arc mailing list linux-snps-arc@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-snps-arc
