Hi Doug, On Fri, Dec 07, 2018 at 10:40:24AM -0800, Doug Anderson wrote: > On Fri, Dec 7, 2018 at 9:42 AM Catalin Marinas <catalin.marinas@xxxxxxx> wrote: > > On Tue, Dec 04, 2018 at 07:38:24PM -0800, Douglas Anderson wrote: > > > Douglas Anderson (4): > > > kgdb: Remove irq flags from roundup > > > kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function() > > > kgdb: Don't round up a CPU that failed rounding up before > > > kdb: Don't back trace on a cpu that didn't round up > > > > FWIW, trying these on arm64 (ThunderX2) with CONFIG_KGDB_TESTS_ON_BOOT=y > > on top of 4.20-rc5 doesn't boot. It looks like they leave interrupts > > disabled when they shouldn't and it trips over the BUG at > > mm/vmalloc.c:1380 (called via do_fork -> copy_process). > > > > Now, I don't think these patches make things worse on arm64 since prior > > to them the kgdb boot tests on arm64 were stuck in a loop (RUN > > singlestep). > > Thanks for the report! ...actually, I'd never tried CONFIG_KGDB_TESTS > before. ...so I tried them now: > > A) chromeos-4.19 tree on qcom-sdm845 without this series: booted up OK > B) chromeos-4.19 tree on qcom-sdm845 with this series: booted up OK > C) v4.20-rc5-90-g30002dd008ed on rockchip-rk3399 (kevin) with this > series: booted up OK > > Example output from B) above: > > localhost ~ # dmesg | grep kgdbts > [ 2.139814] KGDB: Registered I/O driver kgdbts > [ 2.144582] kgdbts:RUN plant and detach test > [ 2.165333] kgdbts:RUN sw breakpoint test > [ 2.172990] kgdbts:RUN bad memory access test > [ 2.178640] kgdbts:RUN singlestep test 1000 iterations > [ 2.187765] kgdbts:RUN singlestep [0/1000] > [ 2.559596] kgdbts:RUN singlestep [100/1000] > [ 2.931419] kgdbts:RUN singlestep [200/1000] > [ 3.303474] kgdbts:RUN singlestep [300/1000] > [ 3.675121] kgdbts:RUN singlestep [400/1000] > [ 4.046867] kgdbts:RUN singlestep [500/1000] > [ 4.418920] kgdbts:RUN singlestep [600/1000] > [ 4.790824] kgdbts:RUN singlestep [700/1000] > [ 5.162479] kgdbts:RUN singlestep [800/1000] > [ 5.534103] kgdbts:RUN singlestep [900/1000] > [ 5.902299] kgdbts:RUN do_fork for 100 breakpoints > [ 8.463900] KGDB: Unregistered I/O driver kgdbts, debugger disabled > > ...so I guess I'm a little confused. Either I have a different config > than you do or something is special about your machine? I tried it now on a Juno board both as a host and a guest and boots fine. It must be something that only triggers ThunderX2. Ignore the report for now, if I find anything interesting I'll let you know. -- Catalin _______________________________________________ linux-snps-arc mailing list linux-snps-arc@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/linux-snps-arc
