This patch adds documentation of device tree bindings for the Synopsys
GPIO via CREG driver.
Reviewed-by: Rob Herring <robh at kernel.org>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
Changes v3->v4:
* Fix #gpio-cells description as driver is used generic GPIO binding.
Chnages v2->v3:
* None.
.../devicetree/bindings/gpio/snps,creg-gpio.txt | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
new file mode 100644
index 000000000000..1b30812b015b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
@@ -0,0 +1,21 @@
+Synopsys GPIO via CREG (Control REGisters) driver
+
+Required properties:
+- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
+- reg : Exactly one register range with length 0x4.
+- #gpio-cells : Since the generic GPIO binding is used, the
+ amount of cells must be specified as 2. The first cell is the
+ pin number, the second cell is used to specify optional parameters:
+ See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- gpio-controller : Marks the device node as a GPIO controller.
+- ngpios: Number of GPIO pins.
+
+Example:
+
+gpio: gpio at f00014b0 {
+ compatible = "snps,creg-gpio-hsdk";
+ reg = <0xf00014b0 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <2>;
+};
--
2.14.4
