sst26wf flash series block protection implementation differs from other SST series, so add specific implementation flash_lock/flash_unlock/flash_is_locked functions for sst26wf flash ICs. NOTE: this patch is basically following mine u-boot commit port: http://git.denx.de/?p=u-boot.git;a=commitdiff;h=3d4fed87a5fa3ffedf64ff2811cd95c5ac4503ac Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com> --- drivers/mtd/spi-nor/spi-nor.c | 177 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 4 + 2 files changed, 181 insertions(+) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index d9c368c44194..6f74c75c9ddc 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -598,6 +598,177 @@ static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask) return ((ret & mask) != (status_new & mask)) ? -EIO : 0; } +/* + * sst26wf016/sst26wf032/sst26wf064 have next block protection: + * 4x - 8 KByte blocks - read & write protection bits - upper addresses + * 1x - 32 KByte blocks - write protection bits + * rest - 64 KByte blocks - write protection bits + * 1x - 32 KByte blocks - write protection bits + * 4x - 8 KByte blocks - read & write protection bits - lower addresses + * + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region + * will be treated as single block. + */ +#define SST26_BPR_8K_NUM 4 +#define SST26_MAX_BPR_REG_LEN (18 + 1) +#define SST26_BOUND_REG_SIZE ((32 + SST26_BPR_8K_NUM * 8) * SZ_1K) + +enum lock_ctl { + SST26_CTL_LOCK, + SST26_CTL_UNLOCK, + SST26_CTL_CHECK +}; + +static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl) +{ + switch (ctl) { + case SST26_CTL_LOCK: + cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8); + break; + case SST26_CTL_UNLOCK: + cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8); + break; + case SST26_CTL_CHECK: + return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8)); + } + + return false; +} + +/* + * Lock, unlock or check lock status of the flash region of the flash (depending + * on the lock_ctl value) + */ +static int sst26_lock_ctl(struct spi_nor *nor, loff_t ofs, uint64_t len, enum lock_ctl ctl) +{ + struct mtd_info *mtd = &nor->mtd; + u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size; + bool lower_64k = false, upper_64k = false; + u8 bpr_buff[SST26_MAX_BPR_REG_LEN] = {}; + int ret; + + /* Check length and offset for 64k alignment */ + if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) { + dev_err(nor->dev, "length or offset is not 64KiB allighned\n"); + return -EINVAL; + } + + if (ofs + len > mtd->size) { + dev_err(nor->dev, "range is more than device size: %#llx + %#llx > %#llx\n", + ofs, len, mtd->size); + return -EINVAL; + } + + /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */ + if (mtd->size != SZ_2M && + mtd->size != SZ_4M && + mtd->size != SZ_8M) + return -EINVAL; + + bpr_size = 2 + (mtd->size / SZ_64K / 8); + + nor->read_reg(nor, SPINOR_OP_READ_BPR, bpr_buff, bpr_size); + if (ret < 0) { + dev_err(nor->dev, "fail to read block-protection register\n"); + return ret; + } + + rptr_64k = min_t(u32, ofs + len, mtd->size - SST26_BOUND_REG_SIZE); + lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE); + + upper_64k = ((ofs + len) > (mtd->size - SST26_BOUND_REG_SIZE)); + lower_64k = (ofs < SST26_BOUND_REG_SIZE); + + /* Lower bits in block-protection register are about 64k region */ + bpr_ptr = lptr_64k / SZ_64K - 1; + + /* Process 64K blocks region */ + while (lptr_64k < rptr_64k) { + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + bpr_ptr++; + lptr_64k += SZ_64K; + } + + /* 32K and 8K region bits in BPR are after 64k region bits */ + bpr_ptr = (mtd->size - 2 * SST26_BOUND_REG_SIZE) / SZ_64K; + + /* Process lower 32K block region */ + if (lower_64k) + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + bpr_ptr++; + + /* Process upper 32K block region */ + if (upper_64k) + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + bpr_ptr++; + + /* Process lower 8K block regions */ + for (i = 0; i < SST26_BPR_8K_NUM; i++) { + if (lower_64k) + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + /* In 8K area BPR has both read and write protection bits */ + bpr_ptr += 2; + } + + /* Process upper 8K block regions */ + for (i = 0; i < SST26_BPR_8K_NUM; i++) { + if (upper_64k) + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + /* In 8K area BPR has both read and write protection bits */ + bpr_ptr += 2; + } + + /* If we check region status we don't need to write BPR back */ + if (ctl == SST26_CTL_CHECK) + return 0; + + nor->write_reg(nor, SPINOR_OP_WRITE_BPR, bpr_buff, bpr_size); + if (ret < 0) { + dev_err(nor->dev, "fail to write block-protection register\n"); + return ret; + } + + return 0; +} + +static int sst26_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) +{ + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_UNLOCK); +} + +static int sst26_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) +{ + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_LOCK); +} + +/* + * Returns EACCES (positive value) if region is locked, 0 if region is unlocked, + * and negative on errors. + */ +static int sst26_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) +{ + /* + * is_locked function is used for check before reading or erasing flash + * region, so offset and length might be not 64k allighned, so adjust + * them to be 64k allighned as sst26_lock_ctl works only with 64k + * allighned regions. + */ + ofs -= ofs & (SZ_64K - 1); + len = len & (SZ_64K - 1) ? (len & ~(SZ_64K - 1)) + SZ_64K : len; + + return sst26_lock_ctl(nor, ofs, len, SST26_CTL_CHECK); +} + static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, uint64_t *len) { @@ -2872,6 +3043,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->flash_is_locked = stm_is_locked; } + if (JEDEC_MFR(info) == SNOR_MFR_SST && info->id[1] == 0x26) { + nor->flash_lock = sst26_lock; + nor->flash_unlock = sst26_unlock; + nor->flash_is_locked = sst26_is_locked; + } + if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index e60da0d34cc1..246014a73f83 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -93,6 +93,10 @@ #define SPINOR_OP_WRDI 0x04 /* Write disable */ #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ +/* Used for SST26* flashes only. */ +#define SPINOR_OP_READ_BPR 0x72 /* Read block protection register */ +#define SPINOR_OP_WRITE_BPR 0x42 /* Write block protection register */ + /* Used for S3AN flashes only */ #define SPINOR_OP_XSE 0x50 /* Sector erase */ #define SPINOR_OP_XPP 0x82 /* Page program */ -- 2.14.4
