[PATCH v2] ARC: Improve cmpxchg syscall implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>

arc_usr_cmpxchg syscall is supposed to be used on platforms
that lack support of Load-Locked/Store-Conditional instructions
in hardware. And in that case we mimic missing hardware features
with help of kernel's sycall that "atomically" checks current
value in memory and then if it matches caller expectation new
value is written to that same location.

What's important in the description above:
 - Check-and-exchange must be "atomical" which means
   preemption must be disabled during entire "transaction"
 - Data accessed is from user-space, i.e. we're dealing
   with virtual addresses

And in current implementation we have a couple of problems:

1. We do disable preemprion around __get_user() & __put_user()
   but that in its turn disables page fault handler.
   That means if a pointer to user's data has no mapping in
   the TLB we won't be able to access required data.
   Instead software "exception handling" code from __get_user_fn()
   will return -EFAULT.

2. What's worse if we're dealing with data from not yet allocated
   page (think of pre-copy-on-write state) we'll successfully
   read data but on write we'll silently return to user-space
   with correct result (which we really read just before). That leads
   to very strange problems in user-space app further down the line
   because new value was never written to the destination.

3. Regardless of what went wrong we'll return from syscall
   and user-space application will continue to execute.
   Even if user's pointer was completely bogus.
   In case of hardware LL/SC that app would have been killed
   by the kernel.

With that change we attempt to imrove on all 3 items above:

1. We still disable preemption around write of user's data but
   if we happen to fail with write we're enabling preemption
   and try to fix-up page fault so that we have a correct permission
   for writing user's data. Then re-try again in "atomic" context.

2. If real page fault fails or even access_ok() returns false
   we send SIGSEGV to the user-space process so if something goes
   seriously wrong we'll know about it much earlier.

Signed-off-by: Peter Zijlstra <peterz at infradead.org>
Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Vineet Gupta <vgupta at synopsys.com>
Cc: Max Filippov <jcmvbkbc at gmail.com>
Cc: linux-arch at vger.kernel.org
---

Changes v1 -> v2:

 * Peter's almost clean-room reimplmentation with less paranoid checks
   and direct invocation of fixup_user_fault() for in-place update of
   write permissions.

 arch/arc/kernel/process.c | 48 ++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 11 deletions(-)

diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 5ac3b547453f..7a7742fba77a 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -47,7 +47,9 @@ SYSCALL_DEFINE0(arc_gettls)
 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
-	int uval = -EFAULT;
+	struct page *page;
+	u32 val;
+	int ret;
 
 	/*
 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
@@ -60,23 +62,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 	/* Z indicates to userspace if operation succeded */
 	regs->status32 &= ~STATUS_Z_MASK;
 
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
+	ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr));
+	if (!ret)
+		 goto fail;
 
+again:
 	preempt_disable();
 
-	if (__get_user(uval, uaddr))
-		goto done;
+	ret = __get_user(val, uaddr);
+	if (ret)
+		 goto fault;
 
-	if (uval == expected) {
-		if (!__put_user(new, uaddr))
-			regs->status32 |= STATUS_Z_MASK;
-	}
+	if (val != expected)
+		 goto out;
+
+	ret = __put_user(new, uaddr);
+	if (ret)
+		 goto fault;
+
+	regs->status32 |= STATUS_Z_MASK;
+
+out:
+	preempt_enable();
+	return val;
 
-done:
+fault:
 	preempt_enable();
 
-	return uval;
+	if (unlikely(ret != -EFAULT))
+		 goto fail;
+
+	down_read(&current->mm->mmap_sem);
+	ret = fixup_user_fault(current, current->mm, uaddr, FAULT_FLAG_WRITE,
+			       NULL);
+	up_read(&current->mm->mmap_sem);
+
+	if (likely(!ret))
+		 goto again;
+
+fail:
+	force_sig(SIGSEGV, current);
+	return ret;
 }
 
 #ifdef CONFIG_ISA_ARCV2
-- 
2.17.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux