Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
Changes v1->v2:
* None.
arch/arc/mm/cache.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index dac12afbb93a..389602cf1594 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1143,6 +1143,19 @@ noinline void __init arc_ioc_setup(void)
{
unsigned int ioc_base, mem_sz;
+ /*
+ * As for today we don't support both IOC and ZONE_HIGHMEM enabled
+ * simultaneously. This happens because as of today IOC aperture covers
+ * only ZONE_NORMAL (low mem) and any dma transactions outside this
+ * region won't be HW coherent.
+ * If we want to use both IOC and ZONE_HIGHMEM we can use
+ * bounce_buffer to handle dma transactions to HIGHMEM.
+ * Also it is possible to modify dma_direct cache ops or increase IOC
+ * aperture size if we are planning to use HIGHMEM without PAE.
+ */
+ if (IS_ENABLED(CONFIG_HIGHMEM))
+ panic("IOC and HIGHMEM can't be used simultaneously");
+
/* Flush + invalidate + disable L1 dcache */
__dc_disable();
--
2.14.4
