This add DT bindings documentation for ARC PGU display controller.
Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: Kumar Gala <galak at codeaurora.org>
Cc: devicetree at vger.kernel.org
Cc: linux-snps-arc at lists.infradead.org
---
.../devicetree/bindings/display/snps,arcpgu.txt | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..c8382fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,74 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+ - encoder-slave: Phandle of encoder chip.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip. The connection is modelled
+ using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+Example:
+
+/ {
+ ...
+
+ pgu at 0xXXXXXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+ encoder-slave = <&encoder_node>;
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+
+ /* HDMI encoder on I2C bus */
+ i2c at 0xXXXXXXXX {
+ compatible = "...";
+
+ encoder_node:encoder_node at 0xXXXXXXXX{
+ compatible="...";
+
+ ports {
+ port at 0 {
+ reg = <0>;
+ hdmi_enc_input:endpoint {
+ remote-endpoint = <&pgu_output>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ hdmi_enc_output:endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+ }
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_enc_output>;
+ };
+ };
+ };
+};
--
2.5.0
