Re: [PATCH v6 3/3] x86/sgx: Resolve EREMOVE page vs EAUG page data race

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue Sep 24, 2024 at 12:49 PM EEST, Dmitrii Kuvaiskii wrote:
> Two enclave threads may try to add and remove the same enclave page
> simultaneously (e.g., if the SGX runtime supports both lazy allocation
> and MADV_DONTNEED semantics). Consider some enclave page added to the
> enclave. User space decides to temporarily remove this page (e.g.,
> emulating the MADV_DONTNEED semantics) on CPU1. At the same time, user
> space performs a memory access on the same page on CPU2, which results
> in a #PF and ultimately in sgx_vma_fault(). Scenario proceeds as
> follows:
>
> /*
>  * CPU1: User space performs
>  * ioctl(SGX_IOC_ENCLAVE_REMOVE_PAGES)
>  * on enclave page X
>  */
> sgx_encl_remove_pages() {
>
>   mutex_lock(&encl->lock);
>
>   entry = sgx_encl_load_page(encl);
>   /*
>    * verify that page is
>    * trimmed and accepted
>    */
>
>   mutex_unlock(&encl->lock);
>
>   /*
>    * remove PTE entry; cannot
>    * be performed under lock
>    */
>   sgx_zap_enclave_ptes(encl);
>                                  /*
>                                   * Fault on CPU2 on same page X
>                                   */
>                                  sgx_vma_fault() {
>                                    /*
>                                     * PTE entry was removed, but the
>                                     * page is still in enclave's xarray
>                                     */
>                                    xa_load(&encl->page_array) != NULL ->
>                                    /*
>                                     * SGX driver thinks that this page
>                                     * was swapped out and loads it
>                                     */
>                                    mutex_lock(&encl->lock);
>                                    /*
>                                     * this is effectively a no-op
>                                     */
>                                    entry = sgx_encl_load_page_in_vma();
>                                    /*
>                                     * add PTE entry
>                                     *
>                                     * *BUG*: a PTE is installed for a
>                                     * page in process of being removed
>                                     */
>                                    vmf_insert_pfn(...);
>
>                                    mutex_unlock(&encl->lock);
>                                    return VM_FAULT_NOPAGE;
>                                  }
>   /*
>    * continue with page removal
>    */
>   mutex_lock(&encl->lock);
>
>   sgx_encl_free_epc_page(epc_page) {
>     /*
>      * remove page via EREMOVE
>      */
>     /*
>      * free EPC page
>      */
>     sgx_free_epc_page(epc_page);
>   }
>
>   xa_erase(&encl->page_array);
>
>   mutex_unlock(&encl->lock);
> }
>
> Here, CPU1 removed the page. However CPU2 installed the PTE entry on the
> same page. This enclave page becomes perpetually inaccessible (until
> another SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl). This is because the page is
> marked accessible in the PTE entry but is not EAUGed, and any subsequent
> access to this page raises a fault: with the kernel believing there to
> be a valid VMA, the unlikely error code X86_PF_SGX encountered by code
> path do_user_addr_fault() -> access_error() causes the SGX driver's
> sgx_vma_fault() to be skipped and user space receives a SIGSEGV instead.
> The userspace SIGSEGV handler cannot perform EACCEPT because the page
> was not EAUGed. Thus, the user space is stuck with the inaccessible
> page.
>
> Fix this race by forcing the fault handler on CPU2 to back off if the
> page is currently being removed (on CPU1). This is achieved by
> setting SGX_ENCL_PAGE_BUSY flag right-before the first mutex_unlock() in
> sgx_encl_remove_pages(). Upon loading the page, CPU2 checks whether this
> page is busy, and if yes then CPU2 backs off and waits until the page is
> completely removed. After that, any memory access to this page results
> in a normal "allocate and EAUG a page on #PF" flow.
>
> Additionally fix a similar race: user space converts a normal enclave
> page to a TCS page (via SGX_IOC_ENCLAVE_MODIFY_TYPES) on CPU1, and at
> the same time, user space performs a memory access on the same page on
> CPU2. This fix is not strictly necessary (this particular race would
> indicate a bug in a user space application), but it gives a consistent
> rule: if an enclave page is under certain operation by the kernel with
> the mapping removed, then other threads trying to access that page are
> temporarily blocked and should retry.
>
> Fixes: 9849bb27152c1 ("x86/sgx: Support complete page removal")
> Fixes: 45d546b8c109d ("x86/sgx: Support modifying SGX page type")
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Kai Huang <kai.huang@xxxxxxxxx>
> Reviewed-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
> Signed-off-by: Dmitrii Kuvaiskii <dmitrii.kuvaiskii@xxxxxxxxx>
> ---
>  arch/x86/kernel/cpu/sgx/encl.h  |  3 ++-
>  arch/x86/kernel/cpu/sgx/ioctl.c | 17 +++++++++++++++++
>  2 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kernel/cpu/sgx/encl.h b/arch/x86/kernel/cpu/sgx/encl.h
> index b566b8ad5f33..96b11e8fb770 100644
> --- a/arch/x86/kernel/cpu/sgx/encl.h
> +++ b/arch/x86/kernel/cpu/sgx/encl.h
> @@ -22,7 +22,8 @@
>  /* 'desc' bits holding the offset in the VA (version array) page. */
>  #define SGX_ENCL_PAGE_VA_OFFSET_MASK	GENMASK_ULL(11, 3)
>  
> -/* 'desc' bit indicating that the page is busy (being reclaimed). */
> +/* 'desc' bit indicating that the page is busy (being reclaimed, removed or
> + * converted to a TCS page). */
>  #define SGX_ENCL_PAGE_BUSY	BIT(2)
>  
>  /*
> diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
> index b65ab214bdf5..c6f936440438 100644
> --- a/arch/x86/kernel/cpu/sgx/ioctl.c
> +++ b/arch/x86/kernel/cpu/sgx/ioctl.c
> @@ -969,12 +969,22 @@ static long sgx_enclave_modify_types(struct sgx_encl *encl,
>  			/*
>  			 * Do not keep encl->lock because of dependency on
>  			 * mmap_lock acquired in sgx_zap_enclave_ptes().
> +			 *
> +			 * Releasing encl->lock leads to a data race: while CPU1
> +			 * performs sgx_zap_enclave_ptes() and removes the PTE
> +			 * entry for the enclave page, CPU2 may attempt to load
> +			 * this page (because the page is still in enclave's
> +			 * xarray). To prevent CPU2 from loading the page, mark
> +			 * the page as busy before unlock and unmark after lock
> +			 * again.
>  			 */
> +			entry->desc |= SGX_ENCL_PAGE_BUSY;
>  			mutex_unlock(&encl->lock);
>  
>  			sgx_zap_enclave_ptes(encl, addr);
>  
>  			mutex_lock(&encl->lock);
> +			entry->desc &= ~SGX_ENCL_PAGE_BUSY;
>  
>  			sgx_mark_page_reclaimable(entry->epc_page);
>  		}
> @@ -1141,7 +1151,14 @@ static long sgx_encl_remove_pages(struct sgx_encl *encl,
>  		/*
>  		 * Do not keep encl->lock because of dependency on
>  		 * mmap_lock acquired in sgx_zap_enclave_ptes().
> +		 *
> +		 * Releasing encl->lock leads to a data race: while CPU1
> +		 * performs sgx_zap_enclave_ptes() and removes the PTE entry
> +		 * for the enclave page, CPU2 may attempt to load this page
> +		 * (because the page is still in enclave's xarray). To prevent
> +		 * CPU2 from loading the page, mark the page as busy.
>  		 */
> +		entry->desc |= SGX_ENCL_PAGE_BUSY;
>  		mutex_unlock(&encl->lock);
>  
>  		sgx_zap_enclave_ptes(encl, addr);

Just acknowledging that my tag hold also for this version. Good job!

All the diff's are as tight as they can get, which is awesome.

BR, Jarkko





[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux