Make cgroup test scripts ash compatible.
Remove cg-tools dependency.
Add documentation for functions.
Tested with busybox on Ubuntu.
Signed-off-by: Haitao Huang <haitao.huang@xxxxxxxxxxxxxxx>
---
v2:
- Fixes for v2 cgroup
- Turn off swapping before memcontrol tests and back on after
- Add comments and reformat
---
tools/testing/selftests/sgx/ash_cgexec.sh | 57 ++++++
.../selftests/sgx/run_epc_cg_selftests.sh | 187 +++++++++++-------
.../selftests/sgx/watch_misc_for_tests.sh | 13 +-
3 files changed, 179 insertions(+), 78 deletions(-)
create mode 100755 tools/testing/selftests/sgx/ash_cgexec.sh
diff --git a/tools/testing/selftests/sgx/ash_cgexec.sh b/tools/testing/selftests/sgx/ash_cgexec.sh
new file mode 100755
index 000000000000..9607784378df
--- /dev/null
+++ b/tools/testing/selftests/sgx/ash_cgexec.sh
@@ -0,0 +1,57 @@
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2024 Intel Corporation.
+
+# Move the current shell process to the specified cgroup
+# Arguments:
+# $1 - The cgroup controller name, e.g., misc, memory.
+# $2 - The path of the cgroup,
+# relative to /sys/fs/cgroup for cgroup v2,
+# relative to /sys/fs/cgroup/$1 for v1.
+move_to_cgroup() {
+ controllers="$1"
+ path="$2"
+
+ # Check if cgroup v2 is in use
+ if [ ! -d "/sys/fs/cgroup/misc" ]; then
+ # Cgroup v2 logic
+ cgroup_full_path="/sys/fs/cgroup/${path}"
+ echo $$ > "${cgroup_full_path}/cgroup.procs"
+ else
+ # Cgroup v1 logic
+ OLD_IFS="$IFS"
+ IFS=','
+ for controller in $controllers; do
+ cgroup_full_path="/sys/fs/cgroup/${controller}/${path}"
+ echo $$ > "${cgroup_full_path}/tasks"
+ done
+ IFS="$OLD_IFS"
+ fi
+}
+
+if [ "$#" -lt 3 ] || [ "$1" != "-g" ]; then
+ echo "Usage: $0 -g <controller1,controller2:path> [-g <controller3:path> ...] <command> [args...]"
+ exit 1
+fi
+
+while [ "$#" -gt 0 ]; do
+ case "$1" in
+ -g)
+ # Ensure that a controller:path pair is provided after -g
+ if [ -z "$2" ]; then
+ echo "Error: Missing controller:path argument after -g"
+ exit 1
+ fi
+ IFS=':' read CONTROLLERS CGROUP_PATH <<EOF
+$2
+EOF
+ move_to_cgroup "$CONTROLLERS" "$CGROUP_PATH"
+ shift 2
+ ;;
+ *)
+ # Execute the command within the cgroup
+ exec "$@"
+ ;;
+ esac
+done
+
diff --git a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
index e027bf39f005..be4172f84580 100755
--- a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
+++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
@@ -1,24 +1,14 @@
-#!/bin/bash
+#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-2.0
-# Copyright(c) 2023 Intel Corporation.
+# Copyright(c) 2023, 2024 Intel Corporation.
TEST_ROOT_CG=selftest
-cgcreate -g misc:$TEST_ROOT_CG
-if [ $? -ne 0 ]; then
- echo "# Please make sure cgroup-tools is installed, and misc cgroup is mounted."
- exit 1
-fi
TEST_CG_SUB1=$TEST_ROOT_CG/test1
TEST_CG_SUB2=$TEST_ROOT_CG/test2
# We will only set limit in test1 and run tests in test3
TEST_CG_SUB3=$TEST_ROOT_CG/test1/test3
TEST_CG_SUB4=$TEST_ROOT_CG/test4
-cgcreate -g misc:$TEST_CG_SUB1
-cgcreate -g misc:$TEST_CG_SUB2
-cgcreate -g misc:$TEST_CG_SUB3
-cgcreate -g misc:$TEST_CG_SUB4
-
# Default to V2
CG_MISC_ROOT=/sys/fs/cgroup
CG_MEM_ROOT=/sys/fs/cgroup
@@ -31,6 +21,19 @@ else
CG_MEM_ROOT=/sys/fs/cgroup/memory
CG_V1=1
fi
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB1
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB2
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB3
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB4
+
+# Turn on misc and memory controller in non-leaf nodes for V2
+if [ $CG_V1 -eq 0 ]; then
+ echo "+misc" > $CG_MISC_ROOT/cgroup.subtree_control
+ echo "+memory" > $CG_MEM_ROOT/cgroup.subtree_control
+ echo "+misc" > $CG_MISC_ROOT/$TEST_ROOT_CG/cgroup.subtree_control
+ echo "+memory" > $CG_MEM_ROOT/$TEST_ROOT_CG/cgroup.subtree_control
+ echo "+misc" > $CG_MISC_ROOT/$TEST_CG_SUB1/cgroup.subtree_control
+fi
CAPACITY=$(grep "sgx_epc" "$CG_MISC_ROOT/misc.capacity" | awk '{print $2}')
# This is below number of VA pages needed for enclave of capacity size. So
@@ -48,34 +51,67 @@ echo "sgx_epc $SMALL" > $CG_MISC_ROOT/$TEST_CG_SUB1/misc.max
echo "sgx_epc $LARGE" > $CG_MISC_ROOT/$TEST_CG_SUB2/misc.max
echo "sgx_epc $LARGER" > $CG_MISC_ROOT/$TEST_CG_SUB4/misc.max
+if [ $? -ne 0 ]; then
+ echo "# Failed setting up misc limits, make sure misc cgroup is mounted."
+ exit 1
+fi
+
+clean_up_misc()
+{
+ sleep 2
+ rmdir $CG_MISC_ROOT/$TEST_CG_SUB2
+ rmdir $CG_MISC_ROOT/$TEST_CG_SUB3
+ rmdir $CG_MISC_ROOT/$TEST_CG_SUB4
+ rmdir $CG_MISC_ROOT/$TEST_CG_SUB1
+ rmdir $CG_MISC_ROOT/$TEST_ROOT_CG
+}
+
timestamp=$(date +%Y%m%d_%H%M%S)
test_cmd="./test_sgx -t unclobbered_vdso_oversubscribed"
+# Wait for a process and check for expected exit status.
+#
+# Arguments:
+# $1 - the pid of the process to wait and check.
+# $2 - 1 if expecting success, 0 for failure.
+#
+# Return:
+# 0 if the exit status of the process matches the expectation.
+# 1 otherwise.
wait_check_process_status() {
- local pid=$1
- local check_for_success=$2 # If 1, check for success;
- # If 0, check for failure
+ pid=$1
+ check_for_success=$2 # If 1, check for success;
+ # If 0, check for failure
wait "$pid"
- local status=$?
+ status=$?
- if [[ $check_for_success -eq 1 && $status -eq 0 ]]; then
+ if [ $check_for_success -eq 1 ] && [ $status -eq 0 ]; then
echo "# Process $pid succeeded."
return 0
- elif [[ $check_for_success -eq 0 && $status -ne 0 ]]; then
+ elif [ $check_for_success -eq 0 ] && [ $status -ne 0 ]; then
echo "# Process $pid returned failure."
return 0
fi
return 1
}
+# Wait for a set of processes and check for expected exit status
+#
+# Arguments:
+# $1 - 1 if expecting success, 0 for failure.
+# remaining args - The pids of the processes
+#
+# Return:
+# 0 if exit status of any process matches the expectation.
+# 1 otherwise.
wait_and_detect_for_any() {
- local pids=("$@")
- local check_for_success=$1 # If 1, check for success;
- # If 0, check for failure
- local detected=1 # 0 for success detection
+ check_for_success=$1 # If 1, check for success;
+ # If 0, check for failure
+ shift
+ detected=1 # 0 for success detection
- for pid in "${pids[@]:1}"; do
+ for pid in $@; do
if wait_check_process_status "$pid" "$check_for_success"; then
detected=0
# Wait for other processes to exit
@@ -88,10 +124,10 @@ wait_and_detect_for_any() {
echo "# Start unclobbered_vdso_oversubscribed with SMALL limit, expecting failure..."
# Always use leaf node of misc cgroups so it works for both v1 and v2
# these may fail on OOM
-cgexec -g misc:$TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log 2>&1
-if [[ $? -eq 0 ]]; then
+./ash_cgexec.sh -g misc:$TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log 2>&1
+if [ $? -eq 0 ]; then
echo "# Fail on SMALL limit, not expecting any test passes."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
else
echo "# Test failed as expected."
@@ -102,54 +138,54 @@ echo "# PASSED SMALL limit."
echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests with LARGE limit,
expecting at least one success...."
-pids=()
-for i in {1..4}; do
+pids=""
+for i in 1 2 3 4; do
(
- cgexec -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_positive_$timestamp.$i.log 2>&1
+ ./ash_cgexec.sh -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_positive_$timestamp.$i.log 2>&1
) &
- pids+=($!)
+ pids="$pids $!"
done
-if wait_and_detect_for_any 1 "${pids[@]}"; then
+if wait_and_detect_for_any 1 "$pids"; then
echo "# PASSED LARGE limit positive testing."
else
echo "# Failed on LARGE limit positive testing, no test passes."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
fi
echo "# Start 5 concurrent unclobbered_vdso_oversubscribed tests with LARGE limit,
expecting at least one failure...."
-pids=()
-for i in {1..5}; do
+pids=""
+for i in 1 2 3 4 5; do
(
- cgexec -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_negative_$timestamp.$i.log 2>&1
+ ./ash_cgexec.sh -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_negative_$timestamp.$i.log 2>&1
) &
- pids+=($!)
+ pids="$pids $!"
done
-if wait_and_detect_for_any 0 "${pids[@]}"; then
+if wait_and_detect_for_any 0 "$pids"; then
echo "# PASSED LARGE limit negative testing."
else
echo "# Failed on LARGE limit negative testing, no test fails."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
fi
echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests with LARGER limit,
expecting no failure...."
-pids=()
-for i in {1..8}; do
+pids=""
+for i in 1 2 3 4 5 6 7 8; do
(
- cgexec -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_$timestamp.$i.log 2>&1
+ ./ash_cgexec.sh -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_$timestamp.$i.log 2>&1
) &
- pids+=($!)
+ pids="$pids $!"
done
-if wait_and_detect_for_any 0 "${pids[@]}"; then
+if wait_and_detect_for_any 0 "$pids"; then
echo "# Failed on LARGER limit, at least one test fails."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
else
echo "# PASSED LARGER limit tests."
@@ -157,51 +193,58 @@ fi
echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests with LARGER limit,
randomly kill one, expecting no failure...."
-pids=()
-for i in {1..8}; do
+pids=""
+for i in 1 2 3 4 5 6 7 8; do
(
- cgexec -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_kill_$timestamp.$i.log 2>&1
+ ./ash_cgexec.sh -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_kill_$timestamp.$i.log 2>&1
) &
- pids+=($!)
+ pids="$pids $!"
done
-
-sleep $((RANDOM % 10 + 5))
+random_number=$(awk 'BEGIN{srand();print int(rand()*10)}')
+sleep $((random_number + 5))
# Randomly select a PID to kill
-RANDOM_INDEX=$((RANDOM % 8))
-PID_TO_KILL=${pids[RANDOM_INDEX]}
+RANDOM_INDEX=$(awk 'BEGIN{srand();print int(rand()*8)}')
+counter=0
+for pid in $pids; do
+ if [ "$counter" -eq "$RANDOM_INDEX" ]; then
+ PID_TO_KILL=$pid
+ break
+ fi
+ counter=$((counter + 1))
+done
kill $PID_TO_KILL
echo "# Killed process with PID: $PID_TO_KILL"
any_failure=0
-for pid in "${pids[@]}"; do
+for pid in $pids; do
wait "$pid"
status=$?
if [ "$pid" != "$PID_TO_KILL" ]; then
- if [[ $status -ne 0 ]]; then
+ if [ $status -ne 0 ]; then
echo "# Process $pid returned failure."
any_failure=1
fi
fi
done
-if [[ $any_failure -ne 0 ]]; then
+if [ $any_failure -ne 0 ]; then
echo "# Failed on random killing, at least one test fails."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
fi
echo "# PASSED LARGER limit test with a process randomly killed."
-cgcreate -g memory:$TEST_CG_SUB2
+mkdir -p $CG_MEM_ROOT/$TEST_CG_SUB2
if [ $? -ne 0 ]; then
echo "# Failed creating memory controller."
- cgdelete -r -g misc:$TEST_ROOT_CG
+ clean_up_misc
exit 1
fi
MEM_LIMIT_TOO_SMALL=$((CAPACITY - 2 * LARGE))
-if [[ $CG_V1 -eq 0 ]]; then
+if [ $CG_V1 -eq 0 ]; then
echo "$MEM_LIMIT_TOO_SMALL" > $CG_MEM_ROOT/$TEST_CG_SUB2/memory.max
else
echo "$MEM_LIMIT_TOO_SMALL" > $CG_MEM_ROOT/$TEST_CG_SUB2/memory.limit_in_bytes
@@ -210,23 +253,27 @@ fi
echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests with LARGE EPC limit,
and too small RAM limit, expecting all failures...."
-pids=()
-for i in {1..4}; do
+# Ensure swapping off
+swapoff -a
+pids=""
+for i in 1 2 3 4; do
(
- cgexec -g memory:$TEST_CG_SUB2 -g misc:$TEST_CG_SUB2 $test_cmd \
+ ./ash_cgexec.sh -g memory:$TEST_CG_SUB2 -g misc:$TEST_CG_SUB2 $test_cmd \
>cgtest_large_oom_$timestamp.$i.log 2>&1
) &
- pids+=($!)
+ pids="$pids $!"
done
-if wait_and_detect_for_any 1 "${pids[@]}"; then
+if wait_and_detect_for_any 1 "$pids"; then
echo "# Failed on tests with memcontrol, some tests did not fail."
- cgdelete -r -g misc:$TEST_ROOT_CG
- if [[ $CG_V1 -ne 0 ]]; then
- cgdelete -r -g memory:$TEST_ROOT_CG
+ clean_up_misc
+ if [ $CG_V1 -ne 0 ]; then
+ rmdir $CG_MEM_ROOT/$TEST_CG_SUB2
fi
+ swapon -a
exit 1
else
+ swapon -a
echo "# PASSED LARGE limit tests with memcontrol."
fi
@@ -239,8 +286,8 @@ else
echo "# PASSED leakage check."
echo "# PASSED ALL cgroup limit tests, cleanup cgroups..."
fi
-cgdelete -r -g misc:$TEST_ROOT_CG
-if [[ $CG_V1 -ne 0 ]]; then
- cgdelete -r -g memory:$TEST_ROOT_CG
+clean_up_misc
+if [ $CG_V1 -ne 0 ]; then
+ rmdir $CG_MEM_ROOT/$TEST_CG_SUB2
fi
echo "# done."
diff --git a/tools/testing/selftests/sgx/watch_misc_for_tests.sh b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
index dbd38f346e7b..3b05475938d0 100755
--- a/tools/testing/selftests/sgx/watch_misc_for_tests.sh
+++ b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
@@ -1,13 +1,10 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
+##!/usr/bin/env sh
+#!/bin/sh
# Copyright(c) 2023 Intel Corporation.
-if [ -z "$1" ]
- then
- echo "No argument supplied, please provide 'max', 'current' or 'events'"
+if [ -z "$1" ]; then
+ echo "No argument supplied, please provide 'max', 'current', or 'events'"
exit 1
fi
-watch -n 1 "find /sys/fs/cgroup -wholename */test*/misc.$1 -exec sh -c \
- 'echo \"\$1:\"; cat \"\$1\"' _ {} \;"
-
+watch -n 1 'find /sys/fs/cgroup -wholename "*/test*/misc.'$1'" -exec sh -c '\''echo "$1:"; cat "$1"'\'' _ {} \;'
--
2.25.1
