[RFC PATCH v4 3/4] selftests/sgx: add len field for EACCEPT op

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



So we can EACCEPT multiple pages inside enclave without EEXIT,
preparing for testing with MADV_WILLNEED for ranges bigger than
a single page.

Signed-off-by: Haitao Huang <haitao.huang@xxxxxxxxxxxxxxx>
---
 tools/testing/selftests/sgx/defines.h   |  1 +
 tools/testing/selftests/sgx/main.c      | 15 +++++++++++++++
 tools/testing/selftests/sgx/test_encl.c | 18 ++++++++++++------
 3 files changed, 28 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/sgx/defines.h b/tools/testing/selftests/sgx/defines.h
index d8587c971941..8578e773d3d8 100644
--- a/tools/testing/selftests/sgx/defines.h
+++ b/tools/testing/selftests/sgx/defines.h
@@ -60,6 +60,7 @@ struct encl_op_eaccept {
 	struct encl_op_header header;
 	uint64_t epc_addr;
 	uint64_t flags;
+	uint64_t len;
 	uint64_t ret;
 };
 
diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index e596b45bc5f8..e457f2d35461 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -493,6 +493,7 @@ TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, TIMEOUT_DEFAULT)
 
 	eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
+	eaccept_op.len = PAGE_SIZE;
 
 	TH_LOG("Entering enclave to run EACCEPT for each page of %zd bytes may take a while ...",
 	       heap->size);
@@ -916,6 +917,7 @@ TEST_F(enclave, epcm_permissions)
 	 * EPCM permissions changed from kernel, need to EACCEPT from enclave.
 	 */
 	eaccept_op.epc_addr = data_start;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_REG | SGX_SECINFO_PR;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1092,6 +1094,7 @@ TEST_F(enclave, augment)
 	self->run.tcs = self->encl.encl_base + PAGE_SIZE;
 
 	eaccept_op.epc_addr = self->encl.encl_base + total_size;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1194,6 +1197,7 @@ TEST_F(enclave, augment_via_eaccept)
 	 * without a #PF). All should be transparent to userspace.
 	 */
 	eaccept_op.epc_addr = self->encl.encl_base + total_size;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1299,6 +1303,7 @@ TEST_F_TIMEOUT(enclave, augment_via_eaccept_long, TIMEOUT_DEFAULT)
 	 * without a #PF). All should be transparent to userspace.
 	 */
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
 
@@ -1451,6 +1456,7 @@ TEST_F(enclave, tcs_create)
 	 */
 
 	eaccept_op.epc_addr = (unsigned long)stack_end;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1471,6 +1477,7 @@ TEST_F(enclave, tcs_create)
 	EXPECT_EQ(eaccept_op.ret, 0);
 
 	eaccept_op.epc_addr = (unsigned long)ssa;
+	eaccept_op.len = PAGE_SIZE;
 
 	EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
 
@@ -1481,6 +1488,7 @@ TEST_F(enclave, tcs_create)
 	EXPECT_EQ(eaccept_op.ret, 0);
 
 	eaccept_op.epc_addr = (unsigned long)tcs;
+	eaccept_op.len = PAGE_SIZE;
 
 	EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
 
@@ -1533,6 +1541,7 @@ TEST_F(enclave, tcs_create)
 
 	/* EACCEPT new TCS page from enclave. */
 	eaccept_op.epc_addr = (unsigned long)tcs;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_TCS | SGX_SECINFO_MODIFIED;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1601,6 +1610,7 @@ TEST_F(enclave, tcs_create)
 	self->run.tcs = self->encl.encl_base;
 
 	eaccept_op.epc_addr = (unsigned long)stack_end;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -1614,6 +1624,7 @@ TEST_F(enclave, tcs_create)
 	EXPECT_EQ(eaccept_op.ret, 0);
 
 	eaccept_op.epc_addr = (unsigned long)tcs;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.ret = 0;
 
 	EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
@@ -1625,6 +1636,7 @@ TEST_F(enclave, tcs_create)
 	EXPECT_EQ(eaccept_op.ret, 0);
 
 	eaccept_op.epc_addr = (unsigned long)ssa;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.ret = 0;
 
 	EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
@@ -1653,6 +1665,7 @@ TEST_F(enclave, tcs_create)
 	 * trigger dynamic add of regular page at that location.
 	 */
 	eaccept_op.epc_addr = (unsigned long)tcs;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -2022,6 +2035,7 @@ TEST_F(enclave, remove_added_page_invalid_access_after_eaccept)
 	EXPECT_EQ(ioc.count, 4096);
 
 	eaccept_op.epc_addr = (unsigned long)data_start;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.ret = 0;
 	eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
@@ -2112,6 +2126,7 @@ TEST_F(enclave, remove_untouched_page)
 	 */
 
 	eaccept_op.epc_addr = data_start;
+	eaccept_op.len = PAGE_SIZE;
 	eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
 	eaccept_op.ret = 0;
 	eaccept_op.header.type = ENCL_OP_EACCEPT;
diff --git a/tools/testing/selftests/sgx/test_encl.c b/tools/testing/selftests/sgx/test_encl.c
index c0d6397295e3..439f1adbd357 100644
--- a/tools/testing/selftests/sgx/test_encl.c
+++ b/tools/testing/selftests/sgx/test_encl.c
@@ -37,12 +37,18 @@ static void do_encl_eaccept(void *_op)
 	int rax;
 
 	secinfo.flags = op->flags;
-
-	asm volatile(".byte 0x0f, 0x01, 0xd7"
-				: "=a" (rax)
-				: "a" (EACCEPT),
-				  "b" (&secinfo),
-				  "c" (op->epc_addr));
+	for (uint64_t addr = op->epc_addr;
+			addr < op->epc_addr + op->len; addr += 4096) {
+		asm volatile(".byte 0x0f, 0x01, 0xd7"
+					: "=a" (rax)
+					: "a" (EACCEPT),
+					  "b" (&secinfo),
+					  "c" (addr));
+		if (rax) {
+			op->ret = rax;
+			return;
+		}
+	}
 
 	op->ret = rax;
 }
-- 
2.25.1




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux