[PATCH v4 4/5] dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>

Document support for the Serial Communication Interface with FIFO (SCIF)
available in the Renesas RZ/V2H(P) (R9A09G057) SoC. The SCIF interface in
the Renesas RZ/V2H(P) is similar to that available in the RZ/G2L
(R9A07G044) SoC, with the following differences:

- RZ/V2H(P) SoC has three additional interrupts: one for Tx end/Rx ready
  and two for Rx and Tx buffer full, all of which are edge-triggered.
- RZ/V2H(P) supports asynchronous mode, whereas RZ/G2L supports both
  synchronous and asynchronous modes.
- There are differences in the configuration of certain registers such
  as SCSMR, SCFCR, and SCSPTR between the two SoCs.

To handle these differences in the driver, a new SoC-specific compatible
string is added, ensuring proper handling of the unique features and
register configurations of the RZ/V2H(P) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v3->v4
- Appended the interrupts instead of adding SoC specific
- Added restriction for clocks and reset

v2->v3
- Added SoC specific compat string
---
 .../bindings/serial/renesas,scif.yaml         | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index c13b31c28049..93fc7b75e2e5 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -79,6 +79,8 @@ properties:
               - renesas,scif-r9a08g045      # RZ/G3S
           - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
 
+      - const: renesas,scif-r9a09g057       # RZ/V2H(P)
+
   reg:
     maxItems: 1
 
@@ -93,6 +95,9 @@ properties:
           - description: Break interrupt
           - description: Data Ready interrupt
           - description: Transmit End interrupt
+          - description: Transmit End/Data Ready interrupt
+          - description: Receive buffer full interrupt (EDGE trigger)
+          - description: Transmit buffer empty interrupt (EDGE trigger)
         minItems: 4
 
   interrupt-names:
@@ -104,6 +109,9 @@ properties:
       - const: bri
       - const: dri
       - const: tei
+      - const: tei-dri
+      - const: rxi-edge
+      - const: txi-edge
 
   clocks:
     minItems: 1
@@ -160,6 +168,7 @@ allOf:
               - renesas,rcar-gen3-scif
               - renesas,rcar-gen4-scif
               - renesas,scif-r9a07g044
+              - renesas,scif-r9a09g057
     then:
       required:
         - resets
@@ -209,9 +218,30 @@ allOf:
       properties:
         interrupts:
           minItems: 6
+          maxItems: 6
 
         interrupt-names:
           minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,scif-r9a09g057
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        interrupts:
+          minItems: 9
+
+        interrupt-names:
+          minItems: 9
 
 unevaluatedProperties: false
 
-- 
2.34.1





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux