[PATCH V9 1/2] serial: exar: Revert "serial: exar: Add support for Sealevel 7xxxC serial cards"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Matthew Howell <matthew.howell@xxxxxxxxxxxx>

Hardware ID of Sealevel 7xxxC cards changed prior to release.
This has rendered 14ee78d5932a redundant.

This reverts commit 14ee78d5932afeb710c8305196a676a715bfdea8.

Fixes: 14ee78d5932a ("Add support for Sealevel 7xxxC serial cards")
Signed-off-by: Matthew Howell <matthew.howell@xxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 077c3ba3539e..3886f78ecbbf 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -47,12 +47,6 @@
 #define PCI_SUBDEVICE_ID_USR_2980		0x0128
 #define PCI_SUBDEVICE_ID_USR_2981		0x0129

-#define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
-#define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
-#define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
-#define PCI_DEVICE_ID_SEALEVEL_780xC		0x1008
-#define PCI_DEVICE_ID_SEALEVEL_716xC		0x1010
-
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
@@ -652,8 +646,6 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
 	else if (board->num_ports)
 		nr_ports = board->num_ports;
-	else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
-		nr_ports = pcidev->device & 0xff;
 	else
 		nr_ports = pcidev->device & 0x0f;

@@ -893,12 +885,6 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
-
-	EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
-	EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux