On Tue, Mar 17, 2020 at 10:39:22AM +0100, Lubomir Rintel wrote:
> A straightforward conversion of the ehci-mv binding to DT schema format
> using json-schema.
>
> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> ---
> .../devicetree/bindings/usb/ehci-mv.txt | 23 -------
> .../bindings/usb/marvell,pxau2o-ehci.yaml | 60 +++++++++++++++++++
> 2 files changed, 60 insertions(+), 23 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt
> create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
> deleted file mode 100644
> index 335589895763e..0000000000000
> --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -* Marvell PXA/MMP EHCI controller.
> -
> -Required properties:
> -
> -- compatible: must be "marvell,pxau2o-ehci"
> -- reg: physical base addresses of the controller and length of memory mapped region
> -- interrupts: one EHCI controller interrupt should be described here
> -- clocks: phandle list of usb clocks
> -- clock-names: should be "USBCLK"
> -- phys: phandle for the PHY device
> -- phy-names: should be "usb"
> -
> -Example:
> -
> - ehci0: usb-ehci@d4208000 {
> - compatible = "marvell,pxau2o-ehci";
> - reg = <0xd4208000 0x200>;
> - interrupts = <44>;
> - clocks = <&soc_clocks MMP2_CLK_USB>;
> - clock-names = "USBCLK";
> - phys = <&usb_otg_phy>;
> - phy-names = "usb";
> - };
> diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> new file mode 100644
> index 0000000000000..189025ef1e92e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
Same license comment.
> +# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell PXA/MMP EHCI bindings
> +
> +maintainers:
> + - Lubomir Rintel <lkundrak@xxxxx>
> +
> +allOf:
> + - $ref: usb-hcd.yaml#
> +
> +properties:
> + compatible:
> + const: marvell,pxau2o-ehci
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + const: USBCLK
> +
> + phys:
> + maxItems: 1
> +
> + phy-names:
> + const: usb
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - phys
> + - phy-names
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/marvell,mmp2.h>
> + usb@d4208000 {
> + compatible = "marvell,pxau2o-ehci";
> + reg = <0xd4208000 0x200>;
> + interrupts = <44>;
> + clocks = <&soc_clocks MMP2_CLK_USB>;
> + clock-names = "USBCLK";
> + phys = <&usb_otg_phy>;
> + phy-names = "usb";
> + };
> +
> +...
> --
> 2.25.1
>
