Hi Radu,
Some few feedback in a hope to help you.
Missatge de Radu Pirea <radu.pirea@xxxxxxxxxxxxx> del dia dl., 4 de
juny 2018 a les 19:03:
>
> This mfd driver is just a wrapper over atmel_serial driver and
> spi-at91-usart driver. Selection of one of the drivers is based on a
> property from device tree. If the property is not specified, the default
> driver is atmel_serial.
>
> Signed-off-by: Radu Pirea <radu.pirea@xxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> drivers/mfd/Kconfig | 9 ++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/at91-usart.c | 67 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 77 insertions(+)
> create mode 100644 drivers/mfd/at91-usart.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index b860eb5aa194..a886672b960d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -99,6 +99,15 @@ config MFD_AAT2870_CORE
> additional drivers must be enabled in order to use the
> functionality of the device.
>
> +config MFD_AT91_USART
> + tristate "AT91 USART Driver"
> + select MFD_CORE
> + help
> + Select this to get support for AT91 USART IP. This is a wrapper
> + over at91-usart-serial driver and usart-spi-driver. Only one function
> + can be used at a time. The choice is done at boot time by the probe
> + function of this MFD driver according to a device tree property.
> +
> config MFD_ATMEL_FLEXCOM
> tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index d9d2cf0d32ef..db1332aa96db 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC) += qcom-spmi-pmic.o
> obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
> obj-$(CONFIG_MFD_TPS65090) += tps65090.o
> obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
> +obj-$(CONFIG_MFD_AT91_USART) += at91-usart.o
> obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
> obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
> obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
> diff --git a/drivers/mfd/at91-usart.c b/drivers/mfd/at91-usart.c
> new file mode 100644
> index 000000000000..262e7affba22
> --- /dev/null
> +++ b/drivers/mfd/at91-usart.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0+
This means GPL-2.0 or later ...
> +/*
> + * Driver for AT91 USART
> + *
> + * Copyright (C) 2018 Microchip Technology
> + *
> + * Author: Radu Pirea <radu.pirea@xxxxxxxxxxxxx>
> + *
> + */
> +
> +#include <dt-bindings/mfd/at91-usart.h>
> +
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/property.h>
> +
> +static struct mfd_cell at91_usart_spi_subdev = {
> + .name = "at91_usart_spi",
> + .of_compatible = "microchip,at91sam9g45-usart-spi",
> + };
> +
> +static struct mfd_cell at91_usart_serial_subdev = {
> + .name = "atmel_usart_serial",
> + .of_compatible = "atmel,at91rm9200-usart-serial",
> + };
> +
> +static int at91_usart_mode_probe(struct platform_device *pdev)
> +{
> + struct mfd_cell cell;
> + u32 opmode;
> + int err;
> +
> + err = device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);
> +
The returned value is not checked (and probably has no sense to
check), so I think you can just remove the err variable.
> + switch (opmode) {
> + case AT91_USART_MODE_SPI:
> + cell = at91_usart_spi_subdev;
> + break;
> + case AT91_USART_MODE_SERIAL:
> + default:
> + cell = at91_usart_serial_subdev;
> + }
> +
> + return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
> + NULL, 0, NULL);
> +}
> +
> +static const struct of_device_id at91_usart_mode_of_match[] = {
> + { .compatible = "atmel,at91rm9200-usart" },
> + { .compatible = "atmel,at91sam9260-usart" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, at91_flexcom_of_match);
> +
> +static struct platform_driver at91_usart_mfd = {
> + .probe = at91_usart_mode_probe,
> + .driver = {
> + .name = "at91_usart_mode",
> + .of_match_table = at91_usart_mode_of_match,
> + },
> +};
> +
> +module_platform_driver(at91_usart_mfd);
> +
> +MODULE_AUTHOR("Radu Pirea <radu.pirea@xxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("AT91 USART MFD driver");
> +MODULE_LICENSE("GPL v2");
And this means GPL-2.0-only, so there is a mismatch. The SPDX
identifier should be GPL-2.0 or the module license should be GPL.
> --
> 2.17.1
>
Cheers,
Enric
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
