Some 8250 ports only have TEMT interrupt, so current implementation
can't work for ports without it. The only chance to make it work is to
loop-read on LSR register.
With NO TEMT interrupt check if both TEMT and THRE are set looping on
LSR register.
Signed-off-by: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250.h | 2 +-
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 2 +-
drivers/tty/serial/8250/8250_port.c | 26 ++++++++++++++++++--------
include/linux/serial_8250.h | 1 +
5 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ebfb0bd5bef5..5c6ae5f69432 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -136,7 +136,7 @@ void serial8250_rpm_put(struct uart_8250_port *p);
void serial8250_rpm_get_tx(struct uart_8250_port *p);
void serial8250_rpm_put_tx(struct uart_8250_port *p);
-int serial8250_em485_init(struct uart_8250_port *p);
+int serial8250_em485_init(struct uart_8250_port *p, bool has_temt_isr);
void serial8250_em485_destroy(struct uart_8250_port *p);
static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 0f8b4da03d4e..888280ff5451 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -330,7 +330,7 @@ static int dw8250_rs485_config(struct uart_port *p,
* are idempotent
*/
if (rs485->flags & SER_RS485_ENABLED) {
- int ret = serial8250_em485_init(up);
+ int ret = serial8250_em485_init(up, false);
if (ret) {
rs485->flags &= ~SER_RS485_ENABLED;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 624b501fd253..ab483c8b30c8 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -725,7 +725,7 @@ static int omap_8250_rs485_config(struct uart_port *port,
* are idempotent
*/
if (rs485->flags & SER_RS485_ENABLED) {
- int ret = serial8250_em485_init(up);
+ int ret = serial8250_em485_init(up, true);
if (ret) {
rs485->flags &= ~SER_RS485_ENABLED;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 95833cbc4338..e14badbbf181 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -599,15 +599,16 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put);
/**
* serial8250_em485_init() - put uart_8250_port into rs485 emulating
* @p: uart_8250_port port instance
+ * @p: bool specify if 8250 port has TEMT interrupt or not
*
* The function is used to start rs485 software emulating on the
* &struct uart_8250_port* @p. Namely, RTS is switched before/after
* transmission. The function is idempotent, so it is safe to call it
* multiple times.
*
- * The caller MUST enable interrupt on empty shift register before
- * calling serial8250_em485_init(). This interrupt is not a part of
- * 8250 standard, but implementation defined.
+ * If has_temt_isr is passed as true, the caller MUST enable interrupt
+ * on empty shift register before calling serial8250_em485_init().
+ * This interrupt is not a part of 8250 standard, but implementation defined.
*
* The function is supposed to be called from .rs485_config callback
* or from any other callback protected with p->port.lock spinlock.
@@ -616,7 +617,7 @@ EXPORT_SYMBOL_GPL(serial8250_rpm_put);
*
* Return 0 - success, -errno - otherwise
*/
-int serial8250_em485_init(struct uart_8250_port *p)
+int serial8250_em485_init(struct uart_8250_port *p, bool has_temt_isr)
{
if (p->em485)
return 0;
@@ -633,6 +634,7 @@ int serial8250_em485_init(struct uart_8250_port *p)
p->em485->start_tx_timer.function = &serial8250_em485_handle_start_tx;
p->em485->port = p;
p->em485->active_timer = NULL;
+ p->em485->has_temt_isr = has_temt_isr;
serial8250_em485_rts_after_send(p);
return 0;
@@ -1517,11 +1519,19 @@ static inline void __stop_tx(struct uart_8250_port *p)
/*
* To provide required timeing and allow FIFO transfer,
* __stop_tx_rs485() must be called only when both FIFO and
- * shift register are empty. It is for device driver to enable
- * interrupt on TEMT.
+ * shift register are empty. If 8250 port supports it,
+ * it is for device driver to enable interrupt on TEMT.
+ * Otherwise must loop-read until TEMT and THRE flags are set.
*/
- if ((lsr & BOTH_EMPTY) != BOTH_EMPTY)
- return;
+ if (em485->has_temt_isr) {
+ if ((lsr & BOTH_EMPTY) != BOTH_EMPTY)
+ return;
+ } else {
+ while ((lsr & BOTH_EMPTY) != BOTH_EMPTY) {
+ lsr = serial_in(p, UART_LSR);
+ cpu_relax();
+ }
+ }
em485->active_timer = NULL;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a27ef5f56431..9b13cf59726b 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -83,6 +83,7 @@ struct uart_8250_em485 {
struct hrtimer start_tx_timer; /* "rs485 start tx" timer */
struct hrtimer stop_tx_timer; /* "rs485 stop tx" timer */
struct hrtimer *active_timer; /* pointer to active timer */
+ bool has_temt_isr; /* say if 8250 has TEMT interrupt or no */
struct uart_8250_port *port; /* for hrtimer callbacks */
};
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
