It has been tested on Mellanox system with BMC equipped with
Aspeed 2520 SoC for programming CPLD devices.
Signed-off-by: Oleksandr Shamray <oleksandrs@xxxxxxxxxxxx>
Signed-off-by: Jiri Pirko <jiri@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
v21->v22
v20->v21
v19->v20
v18->v19
v17->v18
v16->v17
v15->v16
Comments pointed by Joel Stanley <joel.stan@xxxxxxxxx>
- change clocks = <&clk_apb> to proper clocks = <&syscon ASPEED_CLK_APB>
- add reset descriptions in bndings file
v14->v15
v13->v14
v12->v13
v11->v12
v10->v11
v9->v10
v8->v9
v7->v8
Comments pointed by pointed by Joel Stanley <joel.stan@xxxxxxxxx>
- Change compatible string to ast2400 and ast2000
V6->v7
Comments pointed by Tobias Klauser <tklauser@xxxxxxxxxx>
- Fix spell "Doccumentation" -> "Documentation"
v5->v6
Comments pointed by Tobias Klauser <tklauser@xxxxxxxxxx>
- Small nit: s/documentation/Documentation/
v4->v5
V3->v4
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
v2->v3
Comments pointed by Rob Herring <robh@xxxxxxxxxx>
- split Aspeed jtag driver and binding to sepatrate patches
- delete unnecessary "status" and "reg-shift" descriptions in
bndings file
---
.../devicetree/bindings/jtag/aspeed-jtag.txt | 22 ++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 23 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
diff --git a/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
new file mode 100644
index 0000000..7c36eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/jtag/aspeed-jtag.txt
@@ -0,0 +1,22 @@
+Aspeed JTAG driver for ast2400 and ast2500 SoC
+
+Required properties:
+- compatible: Should be one of
+ - "aspeed,ast2400-jtag"
+ - "aspeed,ast2500-jtag"
+- reg contains the offset and length of the JTAG memory
+ region
+- clocks root clock of bus, should reference the APB
+ clock in the second cell
+- resets phandle to reset controller with the reset number in
+ the second cell
+- interrupts should contain JTAG controller interrupt
+
+Example:
+jtag: jtag@1e6e4000 {
+ compatible = "aspeed,ast2500-jtag";
+ reg = <0x1e6e4000 0x1c>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_JTAG_MASTER>;
+ interrupts = <43>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index e7b8b2c..a5e5f75 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7617,6 +7617,7 @@ S: Maintained
F: include/linux/jtag.h
F: include/uapi/linux/jtag.h
F: drivers/jtag/
+F: Documentation/devicetree/bindings/jtag/
K10TEMP HARDWARE MONITORING DRIVER
M: Clemens Ladisch <clemens@xxxxxxxxxx>
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
